Unitech HT330 User guide

Type
User guide

Unitech HT330 is a versatile and reliable device that offers a range of capabilities to enhance your productivity. With its single slot cradle, you can conveniently charge your HT330 terminal in two ways: directly or with the boot case on. The detachable cover design allows for easy removal when using the gun grip or charging with the boot case. The LED indicators provide clear status updates on power and battery charging, ensuring you're always aware of your device's condition.

Unitech HT330 is a versatile and reliable device that offers a range of capabilities to enhance your productivity. With its single slot cradle, you can conveniently charge your HT330 terminal in two ways: directly or with the boot case on. The detachable cover design allows for easy removal when using the gun grip or charging with the boot case. The LED indicators provide clear status updates on power and battery charging, ensuring you're always aware of your device's condition.

HT330 Single Slot Cradle
Quick Start Guide
V1.3
Package
How to Remove the detachable cover
How to Use HT330 Single Slot Cradle
Please make sure the following contents are in the
HT330 gift box. If something is missing or damaged,
please contact your Unitech representative.
The Package Contents
Optional Accessories
HT330 Single Slot Cradle
(with detachable cover)
12V/2A Adaptor for Cradle
(P/N# 1010-900052G)
3 Pins Power Cord (US) for Cradle
(P/N# 1010-601551G)
3 Pins Power Cord (EU) for Cradle
(P/N# 1550-602333G)
3 Pins Power Cord (UK) for Cradle
(P/N# 1550-602689G)
There are two options to charge HT330 terminal:
1. Charge HT330 without the boot case after
installing the detachable cover.
2. Please remove the detachable cover before
charging under the following conditions:
Bend the both groove of the detachable cover
inward, then grab on both sides of the detachable
cover and slide upward to unhook detachable
cover from cradle.
How to Install the detachable cover
Insert the detachable cover until you hear a click
sound. Make sure the arrows of the detachable
Part matches with arrows of the cradle.
Charge HT330 with Boot Case on
Charge HT330 with Gun Grip
LED Indicator Status
HT330 single slot Charging/USB cradle Comparison
Product View
HT330 Single Slot Cradle
HT330 Single Slot
Charging Cradle
(5000-900098G)
HT330 Single Slot
USB Cradle
(5000-900099G)
Power LED Battery Charging
Status LED
LED type LED Status Description
Power LED Blue light Power on
LED off Power off
Battery Charging
Status LED
Red light Battery
Charging
LED off Battery
fully
charged
P/N Models Description Rear View
5000-900098G HT330 1-Slot Charging Cradle
with spare Battery Slot
Charging terminal via DC jack
5000-900099G HT330 1-Slot USB Cradle with
spare Battery Slot
Charging terminal via DC jack
Data transfer by USB type-C
between terminal and PC
If the connector is damaged, please ensure the connector is being
fully repaired before using the unit to avoid causing short circuited.
To ensure the unit working properly, please keep all connectors away
from the contaminants staying inside of them such as dust, grease,
mud, and water. The negligence may cause the unit with no
communication, short circuited, overheated and so on.
CAUTION!
Copyright 2023 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
http://www.ute.com/
  • Page 1 1
  • Page 2 2

Unitech HT330 User guide

Type
User guide

Unitech HT330 is a versatile and reliable device that offers a range of capabilities to enhance your productivity. With its single slot cradle, you can conveniently charge your HT330 terminal in two ways: directly or with the boot case on. The detachable cover design allows for easy removal when using the gun grip or charging with the boot case. The LED indicators provide clear status updates on power and battery charging, ensuring you're always aware of your device's condition.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI