Audi Q7 4M

KUFATEC Audi Q7 4M User manual

  • I have analyzed the provided installation instructions for Kufatec LED Matrix Headlights and LED DRL, specifically for the Audi Q7 4M model. The document outlines the installation process, covering aspects like cable routing, component connections, and coding. I'm here to assist you with any questions you might have about this installation guide.
  • What vehicle is this installation guide for?
    What type of headlights are covered in this document?
    What is the purpose of the provided vehicle overview?
Installation Instructions
LED Matrix Headlights LED DRL
Audi Q7 4M
v1.1 (14.06.2021)
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 1
Contents
1 Liability Exclusion 3
2 Copyright 4
3 General notes 4
4 Safety Instructions 5
5 Requirements for the intended use 5
6 How to connect a cable to another 6
7 Note Cable Inscription/Color 7
8 Assembly Instructions 8
9 Removing front bumper 9
10 Exchange headlights 12
11 Removing trim panel driver’s side 13
12 Connection CAN High & CAN Low 15
13 Coding 16
14 Bus rest 16
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 2
8 Assembly Instructions
The following illustration shows the cable routing as well as the position of the individual components.
1
2
3
2
1
1
3
Figure 3: Vehicle overview
1 Matrix headlights
2 Body Control Module
3 Front camera
Please be aware, that this overview is only for illustration purposes. Always lay the cable set in
the most convenient and shortest way possible. For a detailed description of the cable routing,
please refer to the relevant sections of the following manual.
Kufatec GmbH & Co. KG - Dahlienstr. 15 - 23795 Bad Segeberg - e-mail: [email protected]e 8
/