Page 2
I want to express my thanks to you for being interested in our products and for having
condence in MikroElektronika.
The primary aim of our company is to design and produce high quality electronic products
and to constantly improve the performance thereof in order to better suit your needs.
The FT2232H and Windows® logos and product names are trademarks of FTDI Chip® and Microsoft® in the U.S.A. and other countries.
TO OUR VALUED CUSTOMERS
Nebojsa Matic
General Manager
Downloaded from Arrow.com.Downloaded from Arrow.com.
Page 3
Introduction ......................................................................................................................................... 4
Schematic ............................................................................................................................................. 5
Install drivers before use ................................................................................................................. 6
Click boards are plug and play! ...................................................................................................... 7
Dimensions ........................................................................................................................................... 8
Disclaimer .......................................................................................................................................... 11
Table of Contents
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
Page 4
Introduction
08
01
06
03
02
07
04
Click USB adapter board provides necessary interface for
connecting Click™ add-on boards to your PC through high speed USB
connection. There is no need to use a microcontroller. It features
FT2232H dual high speed USB to multipurpose IC, Analog-to-
Digital converter, EEPROM memory and a single mikroBUS™ host
socket. FT2232H provides necessary communication lines dened
by the mikroBUS™ standard. mikroBUS™ host connector consists of
two 1x8 female headers with SPI (MOSI, MISO, SCK, CS), I2C (SDA,
SCL), UART (Tx, Rx), RST, PWM, Analog and Interrupt lines as
well as 3.3V, 5V and GND power lines. Click USB adapter board
can be powered through USB cable only. On-board power circuitry
generates 3.3V and 5V. Two jumpers are provided on the board.
J1 jumper is used to select whether UART or I2C will be used. J2
selects whether AN pin on mikroBUS™ socket will be just another
GPIO pin, or connected to MCP3204 AD converter circuit, thus
serving for analog readings.
05
09 01 TX/RX indication LED
02 USB MINI-B connector
03 Power indication LED
08 MCP3204 ADC converter
05 FT2232H IC
07 VIN/BC0 jumper (J2)
04 I2C/UART jumper (J1)
06 mikroBUS™ socket
09 EEPROM memory
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
Page 5
VCC5
R2
100K
30
29
28
27
34
33
58
57
56
55
54
53
52
47
36
35
43
44
45
46
37
38
9
49
50
11
12
32
64
63
4
3
24
23
18
17
16
15
14
13
5
6
7
8
10
1
2
22
21
20
19 62
61
60
59
39
40
41
42
48
31
51
26
25
GND
BDBUS1
ACBUS1 BCBUS3
BCBUS4
ACBUS2
BDBUS7
BDBUS6
BDBUS5
BDBUS4
VCCIO
BDBUS3
BDBUS2
GND
ACBUS6
ACBUS7
SUSPEND
BDBUS0
VCORE
BCBUS0
GND
VCCIO
BCBUS2
BCBUS1
GND
VregIN
VregOUT
EECLK
EEDATA
PWREN
BCBUS7
BCBUS6
BCBUS5
EECS
VCORE
VPHY
OSCO
GND
OSCI
GND
REF
DM
DP
AGND
VPLL
ADBUS0
GND
RST
TEST
VCORE
ACBUS0
GND
ADBUS7
ADBUS6
ACBUS4
ACBUS3
ACBUS5
VCCIO
ADBUS2
ADBUS1
ADBUS3
VCCIO
ADBUS4
ADBUS5
FT2232H
U1
EECS
EESK
ADB2
ADB1
VCC3V3
C16
10uF
VCC5
FP3
FERRITE
C15
10nF
3.3V VOLTAGE REGULATOR
R10
470
VCC3V3
X1
12MHz
C14
22pF
C13
22pF
OSCI
OSCO
FP1
FP2
R3
1K
R1 12K1
VCC3V3
ADB0
USBD_P
USBD_N
VCC1V8
VPHY
VPHY
VPLL
USBD_P
USBD_N
1
2
3
54
6
7
8
CS
SCK
DI
DO GND
ORG
NC
VCC
U2
CAT93C46
EECS
EESK
EEDATA
R12 2K2
R7
10K
C21
100nF
R6
10K
R5
10K
VCC3V3
VCC3V3
C1 10uF
C2 100nF
C3 10uF
C4 100nF
VPHY VPLL
C5 100nF
C6 100nF
C7 100nF
VCC1V8
C8 100nF
C9 100nF
C10 100nF
VCC3V3
R11
10K
EEDATA
SDI
SCK
SDI
SDO
SCK
CS
VCC3V3
ADB2
ADB1
VIN
AN
SCK
SDO
SDO
CS
BD4
C18
100nF
R4
2K2
RST/EN
PWR
1
2
3
4
5
6
7 8
9
10
11
12
13
14
CH0
CH1
CH2
CH3
NC
NC
DGND
Din
CS-SHDN
VCC
VREF
AGND
CLK
Dout
U3
MCP3204
VCC3V3
SDI
SCK
BD4
VCC3V3
AN
RST
CS
SCK
SDI
SDO
+3.3V
GND
PWM
INT
RX
TX
SCL
SDA
+5V
GND
1
2
3
4
5
GND
ID
D+
D-
VBUS
CN1
USB MINIB
VCC5
E2 10uF
VCC3V3
E1 10uF
ADB1
ADB1
ADB0
ADB0
J1
C17
1uF
VCC3V3
AN
J2
VIN
R9 27
R8 27
R13
2K2
VCC3V3
TX/RX
TX/RX
2
3
1
GND
Vin
Vout
REG1
LD29080DT33
TX/RX
BC0
BC1 BC2
BC3
BC0
BC1
BC2
BC3
Figure 1: Click USB adapter schematic
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
Install drivers before use
Figure 3: Compass click
board connected to PC via
click USB adapter board
Figure 2:
FT2232H
controller
from FTDI® Chip
On-board FT2232H chip requires drivers to be installed on your
PC before operation. Drivers are available on the manufacturer’s
website:
Page 6
http://www.ftdichip.com/Drivers/VCP.htm
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
Page 7
Gyro click™
LightHz click™
7seg click™Bluetooth2 click™
EEPROM click™THERMO click™
Flash click™Pressure click™
Current click™
FM click™
BarGraph click™
Up to now, MikroElektronika has released more than
60 mikroBUS™ compatible Click Boards™. On the
average, one click board is released per week. It is
our intention to provide you with as many add-on
boards as possible, so you will be able to expand your
development board with additional functionality.
Each board comes with a set of working example
codes. Please visit the Click boards™ webpage for the
complete list of currently available boards:
Click boards are plug and play!
http://www.mikroe.com/click/
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
Page 8
Dimensions
73.66 mm
(2900 mils)
(300 mils) (218 mils)
(300 mils) (800 mils)
(2740 mils)
7.62 mm 5.54 mm
(1085 mils)
27.56 mm
(1245 mils)
31.62 mm
7.62 mm
11.93 mm 11.93 mm
7.77 mm
(306 mils)
(470 mils) (470 mils)
69.60 mm
20.32 mm
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
Page 11
DISCLAIMER
All the products owned by MikroElektronika are protected by copyright law and international copyright treaty. Therefore, this manual is to be treated as any
other copyright material. No part of this manual, including product and software described herein, may be reproduced, stored in a retrieval system, translated or
transmitted in any form or by any means, without the prior written permission of MikroElektronika. The manual PDF edition can be printed for private or local use,
but not for distribution. Any modication of this manual is prohibited.
MikroElektronika provides this manual ‘as is’ without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties or
conditions of merchantability or tness for a particular purpose.
MikroElektronika shall assume no responsibility or liability for any errors, omissions and inaccuracies that may appear in this manual. In no event shall
MikroElektronika, its directors, ocers, employees or distributors be liable for any indirect, specic, incidental or consequential damages (including damages for
loss of business prots and business information, business interruption or any other pecuniary loss) arising out of the use of this manual or product, even if
MikroElektronika has been advised of the possibility of such damages. MikroElektronika reserves the right to change information contained in this manual at any
time without prior notice, if necessary.
TRADEMARKS
The MikroElektronika name and logo, the MikroElektronika logo, mikroBUS™, Click Boards™ are trademarks of MikroElektronika. All other trademarks mentioned
herein are property of their respective companies.
All other product and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are only
used for identication or explanation and to the owners’ benet, with no intent to infringe.
Copyright © MikroElektronika, 2013, All Rights Reserved.
HIGH RISK ACTIVITIES
The products of MikroElektronika are not fault – tolerant nor designed, manufactured or intended for use or resale as on – line control equipment in hazard-
ous environments requiring fail – safe performance, such as in the operation of nuclear facilities, aircraft navigation or communication systems, air trac
control, direct life support machines or weapons systems in which the failure of Software could lead directly to death, personal injury or severe physical or
environmental damage (‘High Risk Activities’). MikroElektronika and its suppliers specically disclaim any expressed or implied warranty of tness for High
Risk Activities.
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
If you want to learn more about our products, please visit our web site at www.mikroe.com
If you are experiencing some problems with any of our products or just need additional
information, please place your ticket at www.mikroe.com/support
If you have any questions, comments or business proposals,
do not hesitate to contact us at o[email protected]om
Click USB Adapter Manual
ver. 1.02
0 100000 023891
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.
/