1
Illegal Parking Detection
Server
V1.0.0 User’s Manual
2019/10/4
www.acti.com
1
TABLE OF CONTENTS
Preface ........................................................................................................................... 2
System Requirements .................................................................................................... 2
Function Overview ......................................................................................................... 3
A. Live View ........................................................................................................ 3
B. Event Log ........................................................................................................ 5
C. Notification .................................................................................................... 6
D. Reportingjob .................................................................................................. 7
E. Device ............................................................................................................. 9
F. Location ........................................................................................................ 11
G. User .............................................................................................................. 12
Setting .......................................................................................................................... 13
A. Log-in ............................................................................................................ 13
B. MGB Server Setting ...................................................................................... 13
C. NVR Setting .................................................................................................. 14
D. Permission Group Setting ............................................................................ 14
E. Email Server Setting ..................................................................................... 15
F. Capacity Cleaning ......................................................................................... 15
www.acti.com
2
Preface
Trademark
All product names mentioned in this documentation are registered trademarks of
their respective companies.
Liability
Every reasonable care has been taken during the writing of this manual. Please
inform your local office if you find any inaccuracies or omissions. We cannot be held
responsible for any typographical or technical errors and reserve the right to make
changes to the product and manuals without prior notice.
System Requirements
When using the Illegal Parking Detection Server (IPS) on other computers, take note
of the following minimum system requirements:
CPU Recommendation: Intel Core i5-6500TE, 8GB RAM
Operating System: 32/64 bit Windows 7 Embedded, Windows 8, Windows 10
Network: Ethernet 1000 Base-T recommended
Storage: SSD 128 GB
www.acti.com
3
Function Overview
A. Live View
Enter the home page, you can find the function list on the left side and live view is in
the middle of the page.
Icon
Description
Select from user defined location
Select from user defined camera
Detection list of Illegal parking
www.acti.com
4
Sample of event as below.
Icon
Description
Click the box to enable push notification and
notification sound.
User can add any note as a notification/ action
required
Click to save the video of the event
View the video recording of the detected illegal
parking vehicle
www.acti.com
5
B. Event Log
User can easily search the related data by using filter, and output the information
that could smart track the vehicle. Filter functions as below:
Icon
Description
Event ID
Enter the event to search the target
Device
Search the target according to the device
Start Date
Set the starting date to search
End Date
Set the ending date to search
Event Type
Select the event category
Location
Select the target location from the drop down
menu
Click Search to start sorting
The report format is as follows
www.acti.com
6
C. Notification
Notification rule can be adjusted from this page. The system provides three
notification methods to notify the manager. Click “New” to start.
The title can be customized. Select the notification mode. The system supports
notification methods by Email. Next, choose a specific person or a group that needs
to be identified. Thus, the system will automatically send out a notification once the
specific group of people is recognized.
www.acti.com
7
After finishing the rule setting, it will show the page as below. You can edit it at any
time.
D. Reporting Job
You can also set the report schedule. Click on “Reporting Job”. Then, click “New” to
edit.
Enter the related data which include the title/ location ... Click “Next”.
www.acti.com
8
Keep typing the requested data such as the receiver who can get report on a pre-set
time especially the sending frequency and exported time. After the settings are done,
click “Save”. The system will automatically send the report by following the rule.
www.acti.com
9
E. Device
Manage the corresponding devices to each area, press "New" to enter and edit.
Select the corresponding MGB Service, the device information field will be extended
downwards after clicking “Device type”.
www.acti.com
10
Fill in the field with detailed information
Click the device’s location on the map to finish editing.
www.acti.com
11
F. Location
Click “New”to define the location. Establish the location name, symbol’s color, and
corresponding device.
www.acti.com
12
G. User
The user can define the different permissions to different managers.
Click “New” to edit the page, enter the account and password (at least 8 characters)
and related information. Follow the progress bar to fill out the profile. Meanwhile,
you can define the permission for each manager you have previously added, which
includes “Read” and “Edit”.
The access level can be modified by the super admin or who has been permitted.
www.acti.com
13
Setting
A. Log-in
Going to Attention List Server webpage (using the domain IP address), enter your
account and password (at least 8 characters).
B. MGB Server Setting
Click “MGB Server” to enter the MGB server setting page. There is one default MGB
server bundled with IPS-100, and the settings have already been done before
shipping.
If the user needs to add extra MGB servers, just click “New” and fill out the
corresponding IP address and port number for connection.
www.acti.com
14
C. NVR Setting
Functions such as Live streaming video and event playback records can be acquired
by the NVR.
D. Permission Group Setting
In the chapter of “User”, there is a permission setting. In addition to edit the single
permission settings for each account, the permission can be classified and can be
opened or closed according to the group.
www.acti.com
15
E. Email Server Setting
In order to send Email notification to manager, user has to set the Email server.
Enter this page and fill out the server related information which includes server
name, SMTP host and SMTP port. By default, Gmail has already been added as it is a
common email server being used in general.
F. Capacity Cleaning
Enter this page under “Setting”, you can set a regular time to clean database via rule
setting in order to keep the storage in sufficient capacity.
You can individually select the days according to event or visitor base. If you do not
need this function, set “0” then the notification will be sent until the database is full.
/
