2. J-Tech Digital
  3. JTECH-SMX44

J-Tech Digital JTECH-SMX44 User guide

  • Hello! I am an AI chatbot trained to assist you with the J-Tech Digital JTECH-SMX44 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is J-Tech Digital JTECH-SMX44?
    What are the key features of JTECH-SMX44?
    How to connect JTECH-SMX44?
    How to control JTECH-SMX44?
    How to switch between sources?
JTD-P8: How to load JTD P8 Driver [QUICK START GUIDE]
1.Overview
JTD-P8 is Multi-Functional control panel. It provides customizable RS232, RS458, Rely and IR control
commands. Here are the instructions for you to load a finished driver to this device.
2.Requirements
2.1 Download the newest control configuration app from www.jtechdigital.com.
The main executive file named as JTD-Control-VXXX.exe
2.2 Download the JTD-P8 driver files for the product you want to control. Normally the compressed file
will include:
JTD-XXX.rss : This is the rs232 command library. Including all the rs232 commands you can to assign to
the buttons on JTD-P8. You can use this library to design your own button layout
JTD-XXX.wpp: This is the pre-configured mapping for rs232 command and the buttons on the JTD-P8.
You only need to load this file to JTD-P8, then you are ready to control the device.
Unzip the driver file and copy all files into the ‘Library’ folder under the JTD-Control application
Make sure your Library folder has the XXX.wpp file. For this quick start guide we used our 2X2 video wall
controller (JTD-795) as an example.
JTD-P8: How to load JTD P8 Driver [QUICK START GUIDE]
3. Process
3.1 Connect power for the JTD-P8. Connect the JTD-P8 to your computer via Mini-USB
3.2 Double click “JTD-Control-XXX.exe”
JTD-P8: How to load JTD P8 Driver [QUICK START GUIDE]
3.3 Click the “Connection” menu, then select “USB”. If everything is right, you should see a “Connect
SUCCESS” message in the top right corner
3.4 Next, click “File”, select “Open”, navigate to the Library folder and select “JTD-795_RS232V1.0.wpp”
JTD-P8: How to load JTD P8 Driver [QUICK START GUIDE]
On the “Action List” section you will see all the command and actions are set up. The only thing you
need to do is load this configuration to the JTD-P8. You also can modify the set up on the “Event Set”
section to your preference.
3.5 Click “Connection”, select “upload” then click “OK” to Clear all data stored in the JTD-P8.
Wait about 30 seconds until you see the green progress bar disappear.
JTD-P8: How to load JTD P8 Driver [QUICK START GUIDE]
3.6 Click “Connection” then select “Disconnect”. Next unplug the USB cable from your computer.
Now power circle the JTD-P8.
3.7 Connect RS232 Port 2 (Port selection will depend on the driver setup) to the 2X2 Video wall (JTD-
795)
JTD-P8: How to load JTD P8 Driver [QUICK START GUIDE]
3.8 You are now ready to control the video wall with the JTD-P8 Control Panel.
JTD-P8: How to load JTD P8 Driver [QUICK START GUIDE]
JTD-P8: How to load JTD P8 Driver [QUICK START GUIDE]
4. Tech Support
J-Tech Digital Support Team
12803 Park 1 Drive Sugar Land, TX 77478
Tel: 832-886-4042
Email: support@jtechdigital.com
/