J-Tech Digital JTECH-ENCH4 User manual

Brand: J-Tech Digital

Model: JTECH-ENCH4

Type: User manual

This manual is also suitable for

JTD220

J-Tech Digital JTECH-ENCH4 is an IPTV H264 Encoder that supports H.264 encoding, UDP, HTTP, RTSP, RTMP, and ONVIF protocols. It can encode video up to 1080p@60HZ and supports MPEG1 Audio Layer 2. The device has a 1000M network interface and supports up to 10 users simultaneously.

The JTECH-ENCH4 is easy to set up and use. Simply connect your HDMI source to the encoder, connect the encoder to your network, and then access the web GUI to configure the settings. You can then stream your video to any device that supports H.264 decoding.

The JTECH-ENCH4 is a versatile device that can be used for a variety of applications, including:

Website: www.jtechdigital.com

Toll Free: 1-888-610-2818[US]

Email: Support@jtechdigital.com

USER MANUAL

J-Tech Digital

IPTV H264 Encoder

JTD-ID:220

RoHS

Table of Contents

1. Features ........................................................................................................................ 3

2. Package Contents ........................................................................................................ 3

3. Hardware Description ................................................................................................... 4

4. Typical Application ........................................................................................................ 4

5. Environment Configuration ........................................................................................... 5

5.1. Software ............................................................................................................. 5

5.1.1. Change the IP Address of PC ........................................................................... 5

5.1.2. Login for configuration ....................................................................................... 6

5.1.3. Check the stream address ................................................................................ 6

6. Encoder Setting ............................................................................................................ 6

6.1. Encoder Setting ................................................................................................. 6

6.2. Audio Setting ..................................................................................................... 7

6.3. Advanced ........................................................................................................... 7

7. OSD Setting .................................................................................................................. 8

7.1. Stream OSD Setting .......................................................................................... 8

7.2. LOGO Uploading ............................................................................................... 8

8. System Setting ............................................................................................................. 9

8.1. Network .............................................................................................................. 9

8.2. Change password .............................................................................................. 9

8.3. Reset ............................................................................................................... 10

8.4. Reboot ............................................................................................................. 10

9. Application .................................................................................................................. 11

9.1. User Application Example ............................................................................... 11

9.1.1. Web Video Preview ......................................................................................... 11

9.1.2. VLC Play .......................................................................................................... 12

9.2. Multi Local User Application Multicast Way ..................................................... 13

9.3. Local Surveillance System Application NVR Conncetion ............................... 14

9.4. Remote Multi User Application RTMP Connection ......................................... 15

WARRANTY ...................................................................................................................... 15

Dear Customer

Thank you for purchasing the JTECH-ENCH4. For optimum performance and safety,

please read these instructions carefully before connecting, operating or adjusting this

product. Please keep this manual for future reference.

1. FEATURES

➢ Supports H.264 encoding.

➢ Supports UDP, HTTP, RTSP, RTMP, ONVIF protocol.

➢ Supports MPEG1 Audio Layer 2.

➢ CBR/VBR rate: 16Kbps~16Mbps.

➢ 1000M network interface uses full duplex mode.

➢ Supports up to 1080p@60HZ HD video input.

➢ Supports image parameter settings.

➢ Supports remote management in WAN (webGUI).

➢ Supports customized resolution settings.

2. PACKAGE CONTENTS

1). Main Unit. H.264 HD HDMI Encoder

2). 1x Power adapter DC 12V 1A

3). Operating Instruction manual

3. HARDWARE DESCRIPTION

① Power input port ② HDMI input

③ Reset button ④ LAN output

⑤ Indicator of power input ⑥ Indicator of LAN output

⑦ Indicator of HDMI input

Note: . Reset to the factory default setting: press “Reset” for 10 seconds till all three

indicators go out.

. LAN: default IP is 192.168.1.168 for the unit.

4. Typical Application

5. Connection Configuration

5.1 Software

5.1.1 Change the IP Address of PC

Assign the PC (or laptop) an IP address. On a Windows PC: Press the +R on your

keyboard →Enter “control netconnections” in the run box and press enter → Right click

on your wired ethernet adapter → Select “Properties → Double click “Internet Protocol

Version 4 (TCP/IPv4)” → Enter the IP address with 192.168.1.11 (0-255) and Subnet

mask 255.255.255.0. Press OK twice to save the configuration.

5.1.2 Login for configuration

Enter the unit IP 192.168.1.168 in your browser, to open the web GUI. Login with the default

user name and pass word as admin.

5.1.3 Check the stream address

As below, the stream address is in the red frame.

6. Encoder Setting

6.1 Encoder Setting

Click “Encoder” setting → “Main stream” → Configure your settings → Click Apply

6.2 Audio setting

Click “Encoder” → “Audio” → Configure your settings → Click “Apply”

6.3 Advanced

Click “Encoder” → “Advanced” → Configure your settings → Click “Apply”.

7. OSD Setting

7.1 Streaming OSD Setting

Click “OSD” → “Network” → Configure your settings → Click “Apply”

7.2 LOGO uploading

“LOGO upload” → Choose a bmp file that matches the requirements → Click “Apply”

※Note: The screenshots might have some difference with actual operation interface due

to software upgrade, all the screenshots are for reference only.

8. System

8.1 Network

Click system → Network → Modify the network settings to match those of your network

→ Click apply. Note: Please change your DNS server to use Google’s DNS servers.

(Provided in the picture below.)

8.2 Change password

System → Change password → Set your password → Apply

8.3 Reset

System → Reset → Reset Note: This will set your device to the factory defaults.

8.4 Reboot

System → Reboot → Reboot (please refresh the web page after 1 minute)

9. Application

9.1 User Application Example

9.1.1 Web Video Preview

Status → Main stream → Preview

Note: For Internet Explorer, you can get preview window directly.

For Chrome, you must install an extension called "Native HLS Playback" to get the

preview window.

Below picture shows the preview effect:

9.1.2 VLC Play

Connect a HDMI source to the HD encoder. Open VLC media player (Download link：

http://www.videolan.org/)，Click “Media”, then click “Open Network Stream”.

Enter the Stream URL from the page of “Main stream”, click “Play”. Note: Please make

sure that the stream type you choose, is enabled in the encoder.

VLC Example:

9.2 Multi Local User Application Multicast Way

If more than one local user needs to stream the video, of the same HD encoder, at the

same time. You may enable multicast IP, then reboot the HD encoder.

After the reboot, copy the multicast IP address from the Status page, and paste the IP

address into the VLC Player. This address can be visited by more than

one user at the same time

9.3 Local Surveillance System Application NVR Connection

1. Confirm if your NVR supports the H.264 codec. Since we’re using ONVIF, you

will need to enable the "RTSP" function as pictured below.

2. If you need the NVR to recognize the audio of the HD Encoder, you will need

to enable the Audio as below picture:

Note: If you've enabled the ONVIF setting and still can't open the video, we

suggest you download the ONVIF TEST tool.

9.4 Remote Multi User: RTMP Connection

To stream over the web, to multiple locations, you may use RTMP. This encoder

supports multiple platforms, including: YouTube Live, Facebook Live, DaCast, Red5,

etc.

9.4.1 RTMP: Stream to YouTube Live

1. To stream to YouTube: access your YouTube Live settings (below) and combine your

“Server URL” and “Stream name/key” (separated by a forward slash).

Full RTMP URL Example: rtmp://a.rtmp.youtube.com/live2/zc3e-yw22-bbdw-baeg

2.Enter the full RTMP URL into the “RTMP PUBLISH URL” setting of your J-Tech Digital

Encoder; apply and reboot.

Note: For best results, check that “TS muxer” is set to “Compatible with FFMPEG”

3. Check “Stream Health” in YouTube and adjust settings accordingly, per your specific

stream requirements.

Note: Use Google’s DNS servers (8.8.8.8 and 8.8.4.4), in your encoder’s network

settings for best results.

MAINTENANCE

Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner of benzine to clean.

PRODUCT SERVICE

1) Damage requiring service: The unit should be serviced by qualified service

personnel if:

(a)The DC power supply cord or AC adaptor has been damaged;

(b)Objects or liquids have gotten into the unit;

(c)The unit has been exposed to rain;

(d)The unit does not operate normally or exhibits a marked change in performance;

(e)The unit has been dropped or the cabinet damaged.

2) Servicing Personnel: Do not attempt to service the unit beyond that described in

these operating instructions. Refer all other servicing to authorized servicing personnel.

3) Replacement parts: When parts need replacing ensure the service uses parts

specified by the manufacturer or parts that have the same characteristics as the original

parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.

4) Safety check: After repairs or service, ask the service to perform safety checks to

confirm that the unit is in proper working condition.

WARRANTY

If your product does not work properly because of a defect in materials or workmanship,

our Company (referred to as "the warrantor" ) will, for the length of the period indicated

as below, (Parts(1)Year, Labor(90) Days) which starts with the date of original purchase

("Limited Warranty period"), at its option either(a) repair your product with new or

refurbished parts, or (b) replace it with a new of a refurbished product. The decision to

repair or replace will be made by the warrantor.

During the "Labor" Limited Warranty period there will be no charge for labor.

During the "Parts" warranty period, there will be no charge for parts. You must mail-in

your product during the warranty period. This Limited Warranty is extended only to the

original purchaser and only covers product purchased as new. A purchase receipt or

other proof of original purchase date is required for Limited Warranty service.

MAIL-IN SERVICE

When shipping the unit carefully pack and send it prepaid, adequately insured and

preferably in the original carton. Include a letter detailing the complaint and provide a day

time phone and/or email address where you can be reached.

LIMITED WARRANTY LIMITS AND EXCLUSIONS

This Limited Warranty ONLY COVERS failures due to defects in materials or

workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.

The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment,

or failures which are caused by products not supplied by warrantor, or failures which

result from accidents, misuse, abuse, neglect, mishandling, misapplication, alteration,

faulty installation, set-up adjustments, misadjustment of consumer controls, improper

maintenance, power line surge, lightning damage, modification, or service by anyone

other than a Factory Service center or other Authorized Servicer, or damage that is

attributable to acts of God.

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER "LIMITED

WARRANTY COVERAGE". THE WARRANTOR IS NOT LIABLE FOR INCIDENTAL OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR

ARISING OUT OF ANY BREACH OF THIS WARRNTY. (As examples, this excludes

damages for lost time, cost of having someone remove or re-install an installed unit if

applicable,

travel to and from the service, loss of or damage to media or images, data or other

recorded content. The items listed are not exclusive, but are for illustration only.)

PARTS AND SERVICE, WHICH ARE NOT COVERED BY THIS LIMITED WARRANTY,

ARE YOUR RESPONSIBILITY.

J-Tech Digital JTECH-ENCH4 User manual

Brand: J-Tech Digital

Model: JTECH-ENCH4

Type: User manual

This manual is also suitable for

JTD220

The JTECH-ENCH4 is a versatile device that can be used for a variety of applications, including:

Download PDF

report

J-Tech Digital JTECH-ENCH4 User manual

This manual is also suitable for

J-Tech Digital JTECH-ENCH4 User manual

Related papers

Other documents