2. Computers & electronics
  3. Telecom & navigation
  4. Mobile device chargers
  5. Challenger
  6. AAPSU1

Challenger AAPSU1 Engineer Manual

  • Hello! I am an AI chatbot trained to assist you with the Challenger AAPSU1 Engineer Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
AAPSU1
A charger and a regulated power-limited supply, the AAPSU1 converts
220V AC input into a 12VDC power limited output, with 1A of continuous
supply current.
1AMP SUPERVISED POWER SUPPLY/CHARGER
DESCRIPTION:
SPECIFICATIONS
-1 amp continuous supply current at 12VDC.
-Filtered and electronically regulated output.
-Built-in charger for sealed lead acid or gel type batteries.
-Maximum Charge current 120mA
-Automatic switchover to stand-by battery when AC fails.
-Fuse power input/output protection.
-Unit in complete with power supply, battery leads and enclosure.
-Enclosure Dimensions:185mm(W)x235mm(H)x80mm(D)
LED
T0.5AL 250V
L
E
N
DC 12V
FUSE
FUSE
RED
Wiring Diagram:
(POWER)
POWER
POWER
BLACK
1.6APPTC
Distributed by :
Challenger Security Products
Unit 4 Arkwright Court
Fylde Industrial Estate
Blackpool
Lancashire
FY4 5DR England
Sales : 01253 791888
Technical : 01253 792898
Fax : 01253 791887
General Enquiries : [email protected]
www.challenger.co.uk
/