Astonica 50100183, 50103306 User manual

  • Hello! I am an AI chatbot trained to assist you with the Astonica 50100183 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
CONTACT OVERSTOCK.COM CUSTOMER SERVICE AT
1-800-843-2446
180106rev1
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
CONTACT CONSUMER SUPPORT AT
1-800-843-2446
Warranty Information:
Products for Home Use
This item and or product is not covered under original manufacturer's warranty.
For warranty issues please contact the retailer directly at
1-800-843-2446
or
www.Overstock.com
Made in China
Distributed by:
Overstock.com
6350 South 3000 East
Salt Lake City, UT 84121
OV SKU No. 10100569-000-000
Model No. 50103306
42" Round Cassimira Table
Instruction Manual
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.
NOTE: This product is intended for residential, non-commercial use.
1. (SEE FIGURE 1) Place table top (A) upside down on a non-scratching surface.
NOTE: One of the two leg assemblies center support should be
positioned lower to allow the second to fit on top.
2. Locate leg assembly with lower center support. Place leg assembly (B) upside down and
align mounting holes over threaded studs on table top. Install wing nuts (C)
and finger tighten. Repeat for second leg assembly (B) and hand tighten wing nuts (C).
CAUTION: Do not over tighten fasteners.
3. All four legs should sit flat. If the table rocks, you have the leg assembly mounted in reverse
order. If so, repeat steps 1 - 3 reversing the placement order of the legs.
ASSEMBLY INSTRUCTIONS
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
A
1Table Top
B
2
Leg Assembly
C
4
Wing Nut
A
B
C
Figure 1
C
C
B
A
C
C
B
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-800-843-2446.
Center Support
NOTE: This product is intended for residential, non-commercial use.
Parts Detail
1
2
/