Astonica 50104020 User manual

Type
User manual
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CONSUMER SUPPORT AT
1-888-424-3354
OR
IF YOU ARE A STORE MANAGER OR EMPLOYEE IN NEED OF ASSISTANCE CALL
1-888-851-5569
PLEASE HAVE YOUR STORE NUMBER READY
Limited Warranty
World Factory, Inc.
®
Products for Home Use
World Factory, Inc.
®
(Seller) warrants to the original Buyer only, that each Astonica
®
Product will be
free from defects in material and workmanship for a period of one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH
ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE
SELLER WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY
FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER
MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This
warranty does not apply to damage, heat-induced coloration changes, scratching or alteration due to
normal use or weathering. To make a claim under this Limited Warranty, you must return the complete
product with proof of purchase, transportation prepaid, to any World Factory, Inc.
®
authorized service
center. Call 1-888-424-3354 for the location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1)
YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR
LOSS OF PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if
such invalid and/or unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
®
Made in China
©2004 World Factory, Inc.
Distributed by:
World Factory, Inc.
Coppell, TX 75019
Model No: 50104020
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.
54" Oval Wrought Iron Table
Instruction Manual
271004rev1
NOTE: This product is intended for residential, non-commercial use.
ASSEMBLY INSTRUCTIONS
1.(SEE FIGURE 1) Place table top (A)
upside down on a non scraching surface.
4.(SEE FIGURE 4) Turn the assembled
table right side up.
Note: All four legs should sit flat.
If the table rocks, you have
the leg assemblies mounted
in reverse order. If so, repeat
step 2 reversing the placement
order of the legs.
A
B
C
D
Figure 2
Figure 3
Figure 4
Figure 1
A
A
B
A
D D
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
A 1Table Top
B 1Leg Assembly Part 1
C 1Leg Assembly Part 2
D
4
Wing Nut
E
1
Plastic Center Hole Bushing
E
2.(SEE FIGURE 2) Turn leg assembly (B)
upside down so that holes at the top
of assembly slide onto the threaded
studs premounted underneath
table top (A).
Attach the wing nuts (D) to threaded
studs and tighten securely.
3.(SEE FIGURE3) Slide the plastic
center hole bushing (E) onto the
center hole ring of leg assembly (C)
repeat step 2 with leg assembly (C).
The center support holes should fit
flush together.
Attach the wing nuts (D) to the
threaded studs and tighten securely.
E
C
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
NOTE: This product is intended for residential, non-commercial use.
CAUTION: Do not over tighten fasteners.
1
2
  • Page 1 1
  • Page 2 2

Astonica 50104020 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI