JLL RE500 Monitor User manual

Type
User manual

JLL RE500 Monitor

The JLL RE500 Monitor is a versatile and feature-rich fitness monitor that can help you track your progress and stay motivated during your workouts. With its large LCD screen, you can easily view your time, speed, distance, heart rate, calories burned, and odometer. The monitor also has a scan mode that allows you to cycle through all of the readouts without having to press any buttons.

In addition to its basic tracking capabilities, the RE500 Monitor also allows you to set target programs for time, distance, heart rate, and calories. This can be a great way to stay motivated and challenged during your workouts. The monitor will track your progress towards your goals and display your results on the screen.

JLL RE500 Monitor

The JLL RE500 Monitor is a versatile and feature-rich fitness monitor that can help you track your progress and stay motivated during your workouts. With its large LCD screen, you can easily view your time, speed, distance, heart rate, calories burned, and odometer. The monitor also has a scan mode that allows you to cycle through all of the readouts without having to press any buttons.

In addition to its basic tracking capabilities, the RE500 Monitor also allows you to set target programs for time, distance, heart rate, and calories. This can be a great way to stay motivated and challenged during your workouts. The monitor will track your progress towards your goals and display your results on the screen.

INSTRUCTION GUIDE
RE500 MONITOR
The contents of this manual are subject to change without notice to improve quality.
© 2023 JLL Fitness Ltd
JLL Fitness Ltd owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of JLL Fitness Ltd is prohibited.
COPYRIGHT
CONTENTS
- Safety precautions
- Cleaning
- Installation
- Operation
Exiting scan mode
Setting target programs
Resetting your monitor
- Data readouts
- Troubleshoot
- Contact details
p. 4
p. 5
p. 6
p. 7
p. 7
p. 7
p. 7
p. 8
p. 9
p. 10
4
SAFETY PRECAUTIONS
The monitor on this machine has been tested to the required standards, each of those passed regulations are shown via
the following symbols:
WEEE - Waste Electrical and Electronic Equipment Recycling.
ABS - Acrylonitrile Butadiene Styrene often referred to as ABS is a type of plastic that is an opaque thermoplastic.
CE - The product conforms with relevant EU directives regarding health and safety or environmental protection.
QC Pass - A product which has fullled the requirements of a technical control and passed the outgoing exams.
ROHS - This is an abbreviation for “Restriction of (the use of certain) Hazardous Substances in electrical and electronic
Equipment”.
WEEE Symbol
ABS Recycling Symbol
EU Compliance Symbol
Quality Control Symbol
ROHS Symbol
5
CLEANING
Please take care when cleaning this monitor as the LCD screen can easily be scratched.
You will need a soft dry cloth
Do not spray cleaning chemicals directly onto the monitor
Do not apply water to the monitor as it is electrical and may damage the internal components
6
INSTALLATION
STEP 1 STEP 2
STEP 3
Insert the batteries, making sure they are the
correct way round.
Remove the four screws from the back of the
monitor.
Connect the male to female wires from the base
to the monitor.
STEP 4
Secure the monitor to the base using the four
screws previously removed.
7
OPERATION
The RE500 monitor has a total of 6 readouts, displaying:
Time Speed Distance Heart Rate Calories Odometer
When rst powered on, the monitor will automatically be in ‘Scan’ mode. This means the digits in the largest segment
on the screen will change every few seconds between time, distance, speed etc. This will allow you to have an overview
while training without pressing any buttons. When the machine is in use you will also see a cycling icon in the top left
corner, when you stop exercising the icon will disappear.
SETTING TARGET PROGRAMS
On this monitor your are able to set a target time, distance, pulse
and calories.
Start by pressing ‘MODE’ until your chosen setting ashes.
Then press ‘SET’ to change the digits to your desired target.
Once set, begin your workout by pedalling and you will see the
digits begin to change.
EXITING SCAN MODE
Press ‘MODE’ to exit scan mode and continuously press it to view
each readout. If you are within scan mode, there will be a scan icon
in the bottom left to indicate this.
RESETTING YOUR MONITOR
Press and hold the ‘RESET’ button until all the digits come up and
return to zero,
8
DATA READOUTS
Readout Measurement
Time Minutes : Seconds
Speed KM/H
Distance Kilometres
Pulse BPM (Beats Per Minute)
Odometer Kilometres
9
TROUBLESHOOT
Issue Resolutions
No power to the monitor Make sure the batteries are fully inserted
and the correct way round.
Check your connection wires from the
monitor to the base. They must not be
trapped, fully connected and the pins
must be straight.
No pulse reading Make sure the pulse plates are clean and
dry.
Do not have any lotion on your hands.
Sweat can affect the reading.
Make sure both hands are fully gripping
each plate.
10
CONTACT DETAILS
Tel: 0121 328 7507
Email: info@jlltness.co.uk
Live Chat: WWW.JLLFITNESS.CO.UK
11
@JLLFITNESS
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

JLL RE500 Monitor User manual

Type
User manual

JLL RE500 Monitor

The JLL RE500 Monitor is a versatile and feature-rich fitness monitor that can help you track your progress and stay motivated during your workouts. With its large LCD screen, you can easily view your time, speed, distance, heart rate, calories burned, and odometer. The monitor also has a scan mode that allows you to cycle through all of the readouts without having to press any buttons.

In addition to its basic tracking capabilities, the RE500 Monitor also allows you to set target programs for time, distance, heart rate, and calories. This can be a great way to stay motivated and challenged during your workouts. The monitor will track your progress towards your goals and display your results on the screen.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI