INSTRUCTION GUIDE
S300 TREADMILL SAFETY KEY
The contents of this manual are subject to change without notice to improve quality.
© 2023 JLL Fitness Ltd
JLL Fitness Ltd owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of JLL Fitness Ltd is prohibited.
COPYRIGHT
CONTENTS
- Instructions
- Contact details
p. 4
p. 8
4
All JLL treadmills need to have a safety key inserted in order to operate the machine. If a key is not inserted the console will
ash and no functions will work. The safety key acts as an emergency stop feature if you happen to fall from the machine.
If you have inserted your safety key and the machine is still not functioning, a way to check your connection is:
INSTRUCTIONS
TOOLS
To perform this check you will need the screwdriver from your tool
pack.
5
STEP 2
STEP 1
Remove the two screws from under the plastic tray.
Start by turning off the power supply to the treadmill.
6
STEP 4
STEP 3
Unclip the wires, check your pins are straight and there is no
damage to the wires.
Carefully lift off the tray.
7
STEP 6
STEP 5
If necessary, loosen the small screw and adjust the position.
Once you have checked everything, you can clip your wires back
together making sure to hear a click and re-attach your tray.
You can also check the alignment of the magnet on the underside
of the tray.
8
CONTACT DETAILS
Tel: 0121 328 7507
Email: info@jlltness.co.uk
Live Chat: WWW.JLLFITNESS.CO.UK
For any technical queries, product defects or damage or delivery questions please contact us using the details below:
JLLFITNESS
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
JLL Indoor Cycling IC300 Pro User manual
-
JLL R200 User manual
-
-
JLL Fitness Ltd CT300 Monitor Installation guide
-
-
Chip PC NG-6600 User manual
-
JVC KD-LHX551 User manual
-
-
JVC LVT1134-001A User manual
-
Whirlpool I95T1C(X)/EX User guide
