F50-series Rotation Guidelines
General
1
CAUTION !
Failure to follow the conditions described below when installing and operating the F50 projector will void your
projector warranty, reduce projector lamp time and may cause serious hazards to persons and property.
Rotation GuidelinesRotation Guidelines
360˚
These guidelines illustrate how F50-series projectors can be rotated without aecting lamp output and lifetime. This rotation is according to specications from the lamp
manufacturer. These specications state that if the lamp is rotated in a direction other than those shown, lamp life and output will be severely reduced.
When mounting the projector in portait mode, a safety mesh must be applied. Article no R9802239, F50 Grid portrait. Contact Barco for ordering.
Assembly of the safety mesh.