RLKM-12
Inaugurating a new era of low-profile rack-mounted servers, the
Advanced Concepts division of Technology Advancement Group®, Inc.
(TAG®) has unleashed three powerful rack-mounted servers to its
High-Density Information Technology™ (HDIT™) product line. Fueled
by intense customer demand, TAG is offering the three servers in
an Intel, Sun, or HpUX platform. What makes these servers so com-
pletely unique is that they are only 2U (3”) high. Rack-mounted
servers produced by other manufactures normally take two-to-three
times the space, but HDIT neatly fits it all in a 2U chassis, and TAG is
the only company that brings it to you!
Before unpacking the RLKM-12 from its shipping container,
prepare an area to place the RLKM-12 on that is clean and
free of debris.
Remove all of the protective wrap from the RLKM-12, including
the LCD glass cover.
The RLKM-12 has been designed to provide easy access to all
controls for both the LCD and the keyboard.
The Figure 1 will assist you in identifying all of the necessary
controls and features of the RLKM-12.
Unpacking the RLKM-12
Identifying Components of the RLKM-12
Figure 1
1. Keyboard
2. Touchpad
3. 12.1” LCD
4. LCD Controls
A. Menu Control m
B. Menu Control n
C. Menu Adjustment m
D. Menu Adjustment n
E. LCD Power Switch
F. LCD Power Indicator
1. The RLKM-12 is packaged with its slide-rails attached to the unit. Carefully slide the
mounting rails from the unit.
2. Fully extend mounting rails before mounting them to the rack enclosure, See Figure 2.
3. Use the supplied hardware to attach the mounting rails to the rack enclosure.
4. Carefully slide the RLKM-12 onto the extended mounting rails, until the slide rail “clicks”.
5. All of the cables have been secured to a Cable Keeper at the rear of the RLKM-12.
Thread the cables through the back of the rack enclosure, before sliding the RLKM-12
into the rack enclosure.
6. Attach the Power Cord, Keyboard, Mouse (Touchpad), and Video cables to their respective
ports.
Note: The keyboard and mouse cables are prominently labeled on their respective connectors.
Make sure that they are connected to the correct port.
7. Bolt the Cable Keeper’s hinge bracket to the rack enclosure, See Figure 3.
8. Press the slide safety lock to slide the RLKM-12 into the rack enclosure.
Note: Make sure the LCD has been stowed before sliding the RLKM-12 into the rack enclosure.
Installation of the RLKM-12
Figure 2
Figure 3
The RLKM-12 is equipped with a 104 key, O/S independent,
keyboard. A 17-key numeric keyboard is located above the
touchpad, See Figure 4.
The O/S independent mouse, of the RLKM-12, is integrated into
the keyboard in the form of a touchpad. The pointer on the
screen is controlled by guiding your finger with the touchpad.
Two buttons are ergonomically positioned below the touchpad,
which act as a left and right mouse button, See Figure 5.
Keyboard
Touchpad
Figure 4
Figure 5
The RLKM-12 is equipped with a 12.1” active matrix color
LCD monitor capable of displaying most standards, from
640x480VGA to 1024x768 XGA @ 60Hz . The controls
on the front panel allow the user to easily adjust the display
parameters by slipping an adjusting tool into the front panel
slots. To access the OSD menu, simply press the Power On/Off
button.
Function Control Buttons
These two buttons allow you to select one of the control functions. Press
either button again to scroll through the menu items.
Adjustment Control Buttons
These two buttons allow you to adjust the selected control functions to
accommodate your specific working environment. Press the upper button to
increase the setting of the selected control function and press the lower button to
decrease the setting of the selected control function.
Power Switch
Push the power switch to turn the LCD on. Push the power switch to pop-up
the On-Screen Display (OSD) menu. Select the menu items using the Function and
Adjustment buttons. Push and hold the power button to turn the LCD off.
Main Menu
BASIC SETTING
POSITION
AUTO-ADJUST
COLOR-TEMP.
MISCELLANEOUS
RESET
EXIT
Basic Setting
CONTRAST - Adjust contrast level
BRIGHTNESS - Adjust brightness level
VIDEO LEVEL - Select input signal voltage
GAMMA - Select color representation
FRAME - Select border color
TO MAIN MENU - Return to Main Menu
Position
CLOCK - Adjust pixel alignment
PHASE - Adjust display clarity
DEFAULT SIZE - Adjust to full screen
NATIVE SIZE - Adjust to original size
H-POSITION - Adjust horizontal position
V-POSITION - Adjust vertical position
H-SIZE - Adjust horizontal size
V-SIZE - Adjust vertical size
GRAPH/TEXT - Select either text or graph
expansion (720x400/640x480 only)
TO MAIN MENU - Return to Main Menu
Color Temp.
9300 - Adjust color temp to CIE 9300
6500 - Adjust color temp to CIE 6500
USER - Adjust to User Color Field
Miscellaneous
AUDIO VOLUME - N/A
OSD H-POSITION - Adjust horizontal
position of OSD
OSD V-POSITION - Adjust vertical
position of OSD
DISPLAY MODE - Adjust frame rate
F/W VERSION - Displays firmware version
FRAME - Select border color
TO MAIN MENU - Return to Main Menu
Reset Menu
BASIC SETTING - Set default parameters
OSD Menu Tree
OSD Menu Tree
LCD
LCD
22355 TAG WAY
Dulles, VA 20166-9310
(703) 406-3000
tag.com
/
