CUT and FOLD
USING THE
TS-9112i TELEPHONE
ACCESSING FEATURES
If Direct Line Access is enabled, you will auto -
matically access an outside line. To place an
intercom call or to access features indicated with
a
, first dial .
Access outside line
L or KA to KK (Americas, UK)
: or KA to KK (other countries)
No hunt group is required if Direct Line Access
is enabled.
Do not disturb
DND
Pick up:
Any ringing extension
L +
U
Specific extension J + <extension> +
U
VOICEMAIL
Access mailbox:
Locally
Voicemail
Remotely + <mailbox number>
Change greeting options S
Change personal options D
(password, date stamp, remote notification options)
MESSAGE PLAYBACK CONTROLS
Rewind 10 seconds A
Go to beginning AA
Skip ahead 10 seconds D
Skip to end of message DD
Check time and date stamp G
Forward message H
Delete message J
Save message L
Skip to next message ?
ACCESSING FEATURES
Place caller on hold
Retrieve caller on hold
Cycle through callers queued
Swap
Answer call waiting
Swap
Call transfer + <extension> +
U
+
Voicemail transfer + + <extension> +
U
+
Cancel transfer
T
while in transfer state +
Conference call Press to put the first party on hold.
Call the second party (for external calls, first access an outside line). Press
U
+ .
Park a caller +
GA: +
U
The system will respond with a parking orbit.
Retrieve a parked caller + <orbit> (500–509) +
U
Two-way intercom paging to TalkSwitch phones* KF + <extension> +
U
*not all phones can receive pages
PA overhead paging : +
U
Attach account code to last call At dial tone, KK + <account code> + ?
Call detail record logging must be active.
CUT and FOLD
CT.TP005.010102
/