Manual # 650407A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
3. Connect the CAT5 cable and the 3-pin
switch harness or 12V power harness
to the clock. Refer to enclosed clock
operating manual for these
connections and setup.
2. With the original clock removed, carefully maneuver the VLK or VLC clock in place from
behind the dash while lining up the mounting holes of the clock to the studs behind the
dash making sure not to scratch the chrome bezel or clear lens, and then secure the
clock in place by using the stock mounting nuts.