MDA Designs Luna User manual

Luna
Brand
MDA Designs
Model
Luna
Category
TV stands
Type
User manual

MDA Designs Luna is a versatile TV cabinet that offers ample storage space and a stylish design to complement your living room. It features a sturdy construction with a black oval finish, providing a solid base for TVs up to 50 inches. The cabinet boasts a spacious interior with multiple compartments, including a glass shelf and a closed storage area with glass doors, allowing you to neatly organize your media accessories, DVDs, and other belongings.

MDA Designs Luna is a versatile TV cabinet that offers ample storage space and a stylish design to complement your living room. It features a sturdy construction with a black oval finish, providing a solid base for TVs up to 50 inches. The cabinet boasts a spacious interior with multiple compartments, including a glass shelf and a closed storage area with glass doors, allowing you to neatly organize your media accessories, DVDs, and other belongings.

2 PERSON ASSEMBLY
1.0 hr
REQUIRED ASSEMBLY TOOLS
2.0M X2.0M
ASSEMBLED DIMENSIONS
1150mm
410mm
470mm
FLOOR AREA
REQUIRED ASSEMBLY SPACE
APPROXIMATE ASSEMBLY TIME
ASSEMBLY INSTRUCTIONS
Black Oval TV Cabinet For TV’s up to 50”
MDAGS2610AI
ISSUE A - 125011
1
2
2
3
4
4
5
6
7
8
9
10
PARTS LIST
no. PART LIST QTY
(1)
BASE PANEL
(2)
SIDE PANEL
(3)
ROTATING BASE ASSEMBLY
(4)
SIDE PROFILE
(5)
TOP PANEL
(6)
GLASS TOP
(7)
REAR PANEL
(8)
(9)
GLASS SHELF
RIGHT HAND GLASS DOOR
LEFT HAND GLASS DOOR
(10)
1
2
2
1
1
1
1
1
1
1
HARDWARE LIST
4x
M6 x 35mm
A
BOLT
12x
M6 x 25mm
B
BOLT
8x
M6 x 38mm
C
CAM PIN
12x
M3 x 14mm
D
SCREW
8x
M4 x 5mm
E
SCREW
4x
15 x 10mm
G
SHELF PEG
4x
M3 x 14mm
H
DOOR HINGE
PLATE
1x
60 x 40 x 20mm
I
DOUBLE MAG
CATCH
1x
M4 x 65mm
J
4mm ALLEN
KEY
1cm
0cm
2cm
3cm
4cm
5cm
6cm
8x
12 x 10mm
F
CAM LOCK
Top Tips before you start!
1. Please check that all parts are present before you start the assembly of your furniture.
2. For ease and speed of assembly, we recommend that before you commence each
step of the assembly, that you identify all the parts required for that step.
3. For larger items, please ensure that you have sufficient space and people ( as
indicated on page 1) to assemble your product safely
4. We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
5. For the protection of your furniture, particularly items of high gloss finish, we
recommend that the product is placed on a protected surface during assembly to
prevent any damage.
6. During assembly please take care not to over-tighten any fittings, as this may
damage the product.
Care and Maintenance of your Furniture
• If the glass is chipped or broken, stop using the product and consult the
manufacturer or supplier.
• Please do not place very hot or very cold items on the glass surface, unless
adequately thick table mats are used to prevent such items from coming into
contact with the glass.
• Please do not use the glass as a chopping surface. Do not strike the glass with
hard or pointed items.
• When cleaning glass panels use a damp cloth or leather with washing up liquid or
soft soap if necessary, do not use washing powders or any other substances
containing abrasives since these substances scratch glass.
• The glass used in this product is toughened and complies with BS EN 12150-
1:2000, clauses 8.3 & 8.4
• Please periodically check all fittings and re-tighten as necessary.
• Please do not sit or stand on this item.
Never allow any kind of liquid to remain on your furniture, Absorption can cause
wood to warp or finishes to de-laminate
• Please do not drag and pull your furniture.
•
STEP 1
4x
C
STEP 2
Ensure the 4 holes align to enable
ALIGN THE 4 HOLES IN ALL 3 PANELS TO FIT BOLTS
4x
A
1
3
1
STEP 3
STEP 4
4x
F
1
2
2
F
X4
CORRECT
WRONG
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING BOLT
TURN CLOCKWISE UNTIL SECURE
6x
B
4
4
LARGE GAP
SMALL GAP
ENSURE PANELS ARE FITTED IN
THE CORRECT POSITION.
STEP 5
STEP 6
4x
F
F
X4
CORRECT
WRONG
WHEN FITTING CAMS
ENSURE STARTING POSITION IS CORRECT
BEFORE YOU INSERT CONNECTING BOLT
TURN CLOCKWISE UNTIL SECURE
4x
D
1x
I
D
I
5
4x
C
6x
B
5
MAG CATCH AT THIS SIDE
STEP 7
STEP 8
6
8x
D
7
CAREFULLY ALIGN GLASS
TOP & PLACE ONTO CABINET
STEP 9
STEP 10
8
4x
G
8x
E
4x
H
9
10
H
E
STEP 11
STEP 12
This TV cabinet features ‘REMOTE FRIENDLY’ glass which allows remote control operation of
equipment inside the cabinet with the doors closed. However, if you have a piece of equipment
with a poor remote signal (some SKY receivers suffer from this), please position the particular
unit on the glass shelf in the middle position. This will then place the unit behind the unprinted
window on the glass doors to allow full function of your remote signal.
Shelf in middle
position
Poor signal unit situated behind
unprinted window on glass doors
PLEASE ENSURE TV
IS SITUATED CENTRALLY
ON THE CABINET
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

MDA Designs Luna User manual

Luna
Brand
MDA Designs
Model
Luna
Category
TV stands
Type
User manual

MDA Designs Luna is a versatile TV cabinet that offers ample storage space and a stylish design to complement your living room. It features a sturdy construction with a black oval finish, providing a solid base for TVs up to 50 inches. The cabinet boasts a spacious interior with multiple compartments, including a glass shelf and a closed storage area with glass doors, allowing you to neatly organize your media accessories, DVDs, and other belongings.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents