2. Kamstrup
  3. 382J

Kamstrup 382J Installation and User Guide

  • Hello! I'm a chat assistant that has read the Kamstrup 382 user manual. I understand how to connect the meter and interpret the readings. I'm ready to answer your questions about the meter's features, such as its manual display change, phase indications, or built-in radio.
  • How do I change the display reading?
    What do the phase indications L1, L2, and L3 mean?
    What does the LED breaker status indicate?
Manual
Kamstrup 382
Kamstrup A/S · Industrivej 28, Stilling · DK-8660 Skanderborg · T: +45 89 93 10 00 · in[email protected] · kamstrup.com
2 Kamstrup A/S • 5512474_F2_GB_01.2015
Kamstrup 382
Operting instructions
Connect the meter in ccordnce with the instlltion digrm on the meter’s type lbel.
Depending on the configurtion  fixed vlue will be displyed, or the disply will chnge between
selected indictions every 10 seconds.
It is possible to chnge the disply reding mnully by ctivting the push button on the meter.
The vilble redings will depend on the meter’s configurtion.
Security nd instlltion guidelines
The meter is only to be used for mesuring electricl energy nd shll operte within the specified
vlues only.
The meter must be disconnected when working on it. It cn be highly dngerous to touch the meter
prts when the meter is switched on.
Therefore, the relevnt security fuse must be removed nd kept in  plce where it cnnot be
inserted by unuthorized persons.
Current locl stndrds, guidelines, regultions nd instruction must be observed. Only uthorized
personnel is permitted to instll electricity meters.
Meters for direct connection must be protected ginst short circuit by  security fuse in ccord-
nce with the mximum current stted on the meter.
Følges ”Retningslinier til sikkerhed og instlltion” ikke, bortflder grntien.
Utility sels
LCD-disply
Opticl interfce
LED (meter constnt)
Push button
Type lbel
LED breker sttus
(only meters with
internl breker)
The meter constnt LED blinks proportionlly to the consumed ctive energy.
Only uthorized personnel must brek the utility seling.
3Kamstrup A/S • 5512474_F2_GB_01.2015
Kamstrup 382
LCD disply
The phse indictions (L1, L2 nd L3) hve vrious functions. They indicte the two situtions
described below.
From reset (voltge cut-off) of meter nd 4 hours hed:
Indictions L1, L2, L3 Indicte
On Voltge is bove minimum limit (160V), nd lod is bove minimum limit
(2.3W).
Off Voltge is below minimum limit (160V).
Flshing Voltge is bove minimum limit (160V), nd lod is below minimum limit
(2.3W).
After 4 hours’ opertion:
Indictions L1, L2, L3 Indicte
On Voltge is bove minimum limit (160V).
Off Voltge is below minimum limit (160V).
If the lod exceeds the minimum limit nd the meter is configured with this reding, consumption
will be indicted vi the qudrnt reding.
The meter’s LED cn be used provided tht the qudrnt indictor is not selected.
The mesured unit is displyed in the right side of the disply.
Triff indicting ctive triff.
L1 T1 T2 T3 T4
7-digit identifiction field Qudrnt reding Sttus reding
Unit field
Triff reding
Phse indiction
Vlue field
Terminls
Multi core 7 core Mssive /
terminls
Size: 1,5 – 25 mm2
1,5 – 35 mm2
Screw: Pz 2
Torch: 2,5 – 3 Nm
Brss terminl
35 mm2
≥ 10 mm2≥ 10 mm2≥ 4 mm2
Steel terminl
35 mm2
≥ 6 mm2≥ 6 mm2≥ 1,5 mm2
Steel terminl
25 mm2
≥ 6 mm2≥ 6 mm2≥ 1,5 mm2
4 Kamstrup A/S • 5512474_F2_GB_01.2015
Kamstrup 382
With built-in rdio
If the meter is supplied with integrl rdio for estblishment of remote reding, the meter uto-
mticlly connects to  rdio network. The integrl rdio is equipped with n internl ntenn.
The rdio signl strength cn be red by mens of  hnd-held terminl. If the rdio signl is not
sufficient, n externl ntenn must be connected. Plese see current documenttion on vilble
ntenns.
Mounting  communiction module in the meter my influence communiction, plese contct
Kmstrup.
With disconnection function
With this type of meter, it must be checked tht the red/green diode is not switched on. This indi-
ctes tht the consumer’s supply is switched off.
Instlltion dimensions
201,6
166,9
684-38A-C4-00-010
Sn:
1
3 x230/400V
50 Hz
LED/S0:1000 imp/kWh
0,5-5(85)A
Kl. A (3) EN 62053-23
EN 50470 1/3
2007W13
40 +70C
T10063
-
--
201,5
166,9
Connection digrms
The vlid connection digrm ppers from the type lbel.
3-phse, 4-wire 3-phse, 3-wire (Aron)
123456789101112
L1
L2
L3
N
P+
S0 +
20
-
21
1234567891011
12
L1
L2
L3
P+
S0 +
20
-
21
/