2 Kamstrup A/S • 5512568_D2_GB_02.2015
Kamstrup 162
Operting instructions
Connect the meter in ccordnce with the instlltion digrm on the meter’s verifiction cover.
Depending on the configurtion fixed vlue will be displyed, or the disply will chnge between
selected indictions every 10 seconds.
It is possible to chnge the disply reding mnully by ctivting the push button on the meter.
The vilble redings will depend on the meter’s configurtion.
Security nd instlltion guidelines
The meter shll only to be used for mesuring electricl energy nd shll operte within the
specified vlues only.
The meter must be disconnected when working on it. It cn be highly dngerous to touch the meter
prts when the meter is switched on.
Therefore, the relevnt security fuse must be removed nd kept in plce where it cnnot be
inserted by unuthorized persons.
Current locl stndrds, guidelines, regultions nd instruction must be observed. Only uthorized
personnel is permitted to instll electricity meters.
Meters for direct connection must be protected ginst short circuit by security fuse in
ccordnce with the mximum current stted on the meter.
Utility sel
LCD-disply
Opticl interfce
LED (meter constnt)
Push button
Type lbel
LED breker sttus
(only meters with
internl breker)
The meter constnt LED blinks proportionlly to the consumed ctive energy.
Only uthorized personnel must brek the utility seling.