01
Slide the 2 way connectors over each leg, and securely lock into place using
M8x20mm cap head bolts.
Ensure the worksurface is centered over the frame. Fully tighten all M5x20mm self
tapping screws through each leg and beams space bracket into the worksurface.
Page 3 of 4
INSTALLATION GUIDE
San Fran System
Round Meeting Table
Sizes: 1200mm, 1350mm , 1500mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Loosely connect the longer M8x20mm dome head bolt and slot nut through the beam
spacer bracket. Slide onto beams and fully tighten in place (1350 & 1500 mm tables only).
Securely connect legs to beams lenghts using the shorter
M8x20mm dome head bolts.
02
03 04