2. JasonL
  3. BSFW1248PT

JasonL BSFW1248PT, BSFC1248PT Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the JasonL BSFW1248PT Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What tools are required for assembly?
    What should I do about pre-drilled holes in the table top?
    What size are the table tops?
Special Note: Please ignore any pre-drilled holes or nut inserts that maybe present in your top(s).
They will not match your particular table/desk base and woods screws will be required to be screwed
directly into the underside of the top.
Tools Required: Power screwdriver.
INSTALLATION GUIDE
San Fran System
Boardroom Table
Size: 4800mm x 1200mm
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Leg x4
Adjustable Foot x4
Leg Cable Cover x4
Rail Lengths x2 (490mm)
Rail Lengths x4 (720mm)
Rail Widths x4 (1150mm)
Intermediate Leg x3 (490mm)
2 Way Connector x4
2 Way Connector Cap x4
3 Way Connector x6
3 Way Connector Cap x6
Rail Space Bracket x6
Slot Nut x6
Table Top x4 (1200mm x 1200mm)
Support Connector x8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
M8x20mm Dome Head x26
M8x12mm Dome Head x2
M8x20mm Cap Head x10
M5x20mm Self Tapping x36
16
17
18
19
COMPONENTS
SCREWS
INSTALLATION GUIDE
San Fran System
Boardroom Table
Size: 4800mm x 1200mm
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
14 11 15
17
18
6
10
5
5
7
3
1
2
8
9
5
5
4
17
12
16
INSTALLATION GUIDE
San Fran System
Boardroom Table
Size: 4800mm x 1200mm
01 02
04
Slide the 2 way connectors over each leg, and securely lock into place
using M8x20mm cap head bolts. Slide 3 way connectors into intermediate
leg & secure into place using M8x20mm cap head bolts.
Loosely connect the longer M8x20mm dome head bolt and slot nut through the
rail spacer bracket. Slide onto required rails and fully tighten in place.
Securely connect legs to rails lengths using the shorter M8x20mm dome
head bolts.
03
Loosely connect the shorter M8x12mm dome head bolt and slot nut through the
metal rail spacer bracket. Slide onto required rails and fully tighten in place.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
05
Securely connect legs to rails widths using the shorter
M8x12mm dome head bolts.
Ensure the work surfaces are centered over the frame. Fully tighten all M5x20mm
self tapping screws through each leg rail spacer and support connector bracket
into the work surfaces.
Cancel any power box cable using the magnetic leg cable covers.
INSTALLATION GUIDE
San Fran System
Boardroom Table
Size: 4800mm x 1200mm
Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
07
06
/