Package Contents:
The following items should be included in the box. If any items are missing please contact your supplier.
1 x RP-31 Panel complete with cable loom
4 x Rack Screws
15 x Cable Ties
1 x Fitting Instructions
Assembly
The RP-31 is supplied with numbered cables for connecting to the ITC-100. Please look at the following table
carefully:
Connect To
RP-31 Intercom 4P XLR cable (Channel: 1)
ITC-100 4P XLR connector Channel: 1
RP-31 Intercom 4P XLR cable (Channel: 2)
ITC-100 4P XLR connector Channel: 2
RP-31 Intercom 4P XLR cable (Channel: 3)
ITC-100 4P XLR connector Channel: 3
RP-31 Intercom 4P XLR cable (Channel: 4)
ITC-100 4P XLR connector Channel: 4
RP-31 Intercom 4P XLR cable (Channel: 5)
ITC-100 4P XLR connector Channel: 5
RP-31 Intercom 4P XLR cable (Channel: 6)
ITC-100 4P XLR connector Channel: 6
RP-31 Intercom 4P XLR cable (Channel: 7)
ITC-100 4P XLR connector Channel: 7
RP-31 Intercom 4P XLR cable (Channel: 8)
ITC-100 4P XLR connector Channel: 8
Use the four rack fixing screws to secure the panel into the rack.