Axis AX01-TABMOUNT Overviews & Installation Instructions

Brand: Axis

Model: AX01-TABMOUNT

Type: Overviews & Installation Instructions

Axis AX01-TABMOUNT is a rugged tablet mount designed for commercial vehicles, providing a secure and stable solution for tablets in demanding environments. With its magnetic pogo pin charging connector, it ensures reliable charging and easy installation. The high-impact protective case safeguards your Samsung Tab E or Apple Mini 4, while the 4-point cradle hooks offer a secure fit. The quick-release feature allows for effortless removal of the tablet when needed.

Axis TMS Corp

855-339-6599

www.axistms.com

Axis TMS Corp 405 S Center St Royal Oak, MI 48067 | tel: 855 339 6599 | fax: 586 239 0258

Tablet Mount

Overview & Installation Instructions

AX01-TABMOUNT

Axis TMS Corp

855-339-6599

www.axistms.com

Axis TMS Corp 405 S Center St Royal Oak, MI 48067 | tel: 855 339 6599 | fax: 586 239 0258

Table of Contents

Page 3 ………………………………………………………………………… What’s Included

Page 4 ………………………………………………………………………… Wiring Harness Installation Instructions

Page 5 …………………………………………………………………………. About and Warranty

Page 6 …………………………………………………………………………. Wiring Harness

Page 7 …………………………………………………………………………. Cradle

Page 8 …………………………………………………………………………. High-Impact Protective Case

Page 9 …………………………………………………………………………. Quick-Connect Charing System

Axis TMS Corp

855-339-6599

www.axistms.com

Axis TMS Corp 405 S Center St Royal Oak, MI 48067 | tel: 855 339 6599 | fax: 586 239 0258

What’s Included

Here is what is included in the AX01-TABMOUNT purchase out of the box:

1. High Impact Tablet Protective Case (Samsung Galaxy Tab E / Apple Mini 4)

2. Magnetic Quick Connect Charging System

3. Wiring Harness

4. Zip-Ties

5. Bolt-in base

6. 4” mounting post

7. Standard cradle

8. 2 set of keys

Note: You will need a size 10 star tip screwdriver to open the top of the case and insert the

tablet.

Axis TMS Corp

855-339-6599

www.axistms.com

Axis TMS Corp 405 S Center St Royal Oak, MI 48067 | tel: 855 339 6599 | fax: 586 239 0258

Wiring Harness Installation Instructions

Ignition Sense Installation

(90 min shutoff timer once truck is turned off)

Step 1: Guide the end of the wiring harness with 3 wires to the fuse panel. The ground (Black)

wire should be fastened to the metal body with a self-tapping screw or connect to an existing

screw/bolt that is grounded. It is best to install the ground where daily activity in the vehicle

won’t hit it.

Step 2: Locate 12 Volt ignition fuse in the panel and connect the White wire using the copper

fuse tap provided.

Step 3: Locate a constant hot 12-volt fuse, and using a fuse tap, connect the Red wire to

complete installation.

Wire Hot Installation

(Constant power to GPS unit, even after truck is turned off)

Step 1: Complete ignition sense installation Step 1. (Found Above)

Step 2: Twist White and Red wire tips together, ensuring they will not separate from one

another during installation. Locate a hot 12-volt fuse and using a fuse tap connect the twisted

Red and White wires.

Axis TMS Corp

855-339-6599

www.axistms.com

Axis TMS Corp 405 S Center St Royal Oak, MI 48067 | tel: 855 339 6599 | fax: 586 239 0258

About and Warranty

• Providing commercial vehicle mounts for feature phones, smartphones and tablets since

2005.

• Installed in garbage trucks, taxis, cement, trucks, busses, dump trucks, and long-haul

trucks.

• Deployed in 130,000 commercial holders.

• Two-year warranty on protective case

• One-year warranty on wiring harness

Axis TMS Corp

855-339-6599

www.axistms.com

Axis TMS Corp 405 S Center St Royal Oak, MI 48067 | tel: 855 339 6599 | fax: 586 239 0258

Wiring Harness

• Certified by the National Accessory Center (NAC)

• 2.4 amps of power

• Prevents over-charging

• Complete & ready to install

• 200,000 currently installed

• Ready-to-Install

• One-year warranty

Axis TMS Corp

855-339-6599

www.axistms.com

Axis TMS Corp 405 S Center St Royal Oak, MI 48067 | tel: 855 339 6599 | fax: 586 239 0258

Cradle

1. Magnetic, pogo pin charging connector

2. Keyed cradle lock provides security and stability when tablet is mounted in vehicle.

Commercial grade, 4-inch mounting post with metal mounting bracket and rubber ball

that absorbs vibration

3. Heavy-duty, spring loaded cradle

Axis TMS Corp

855-339-6599

www.axistms.com

Axis TMS Corp 405 S Center St Royal Oak, MI 48067 | tel: 855 339 6599 | fax: 586 239 0258

High-Impact Protective Case

• Durable, ruggedized polymer

• Designed for Samsung Tab E or Apple Mini 4 (Must purchase specifically for model)

• Hand Strap

• Sealed control buttons

• Secure, 4-point cradle hooks

• Quick-Release

• Easy installation

• Two-year warranty

Axis TMS Corp

855-339-6599

www.axistms.com

Axis TMS Corp 405 S Center St Royal Oak, MI 48067 | tel: 855 339 6599 | fax: 586 239 0258

Quick – Connect Charging System

The dock side of the connector is built-in to the mounting bracket and supplies power from the

vehicle via the wiring harness.

The tablet is built to be durable, has a protective case, and plugs into the charging port of your

device. Because you never have to unplug the connector from your device, your tablet’s USB

charging port will be protected from physical damage.

Axis AX01-TABMOUNT Overviews & Installation Instructions

Axis AX01-TABMOUNT Overviews & Installation Instructions

Axis AX01-TABMOUNT Overviews & Installation Instructions

Other documents