Page is loading ...
Identification:
Technical Bulletin:
Date:
Issuer:
Factory:
D02-D03-D04
CGX2008-04 (page 1 of 3)
13 February 2008
R. Sartor (DWS Customer Support)
CGX – Dishwashing – Pordenone (I)
Subject
Salt Container in UC/FL/HT
Model
Undercounter double skin, Front Loading and Hood Type high capacity with
continuous water softener built-in (LS6EADPWS / WT38WS, LU7ADPWS /
WTU40ADPWS and LS14EAWS / WT65WS).
Problem
Water leakage.
Reason
The cap is not closed properly because of too short thread (bad sealing
causes water leakage because the salt container is under pressure while the
machine makes resins regeneration).
Action in
Factory
We have introduced:
• a warning label from September 2007
• a ring nut + longer thread for the salt container (to keep it aligned and in
touch with the frontal panel) from serial number 80700001.
From serial number 80800001 we have also removed the rinse aid container.
Of course this means that frontal panels are changed too.
The “old” salt container 0L0763 is replaced by:
ELECTROLUX PROFESSIONAL SPA
MAILING ADDRESS TELEPHONE WEBSITE VAT NO.
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380650 www.electrolux.com 00072220932
OFFICE ADDRESS TELEFAX E-MAIL ADDRESS
VIA SEGALUZZA, 30
33170 PORDENONE - ITALY
++39 0434 380636
++39 0434 385646
Share more of our thinking at www.electrolux.com
Technical Bulletin (Salt Container).doc
Up to serial number
80600099
With rinse aid container
From serial number
80700001
Without rinse aid container
Salt container
0L1694
With rinse aid container
0L1692
Without rinse aid container
Gasket 0L1691
Ring Nut 0L1693
Kit salt container + gasket + ring
nut
0L1753
(= 0L1694 + 0L1691 + 0L1693)
n.a.
Frontal panel Undercounter
LS6EADPWS / WT38WS
With holes for the badge
0L0743
0L1688
Frontal panel Undercounter
LS6EADPWS / WT38WS
Without holes for the badge
0L1686
0L1690
Frontal panel Front Loading
LU7ADPWS / WTU40ADPWS
With holes for the badge
0L1447 0L1687
Frontal panel Hood Type
LS14EAWS / WT65WS
0L0798 0L1689
Share more of our thinking at www.electrolux.com
2
Salt container
0L1694
with rinse aid container
Salt container
0L1692
without rinse aid container
Gasket 0L1691
Ring nut 0L1693
Action in
Field
“New” salt containers are perfectly interchangeable towards the “old” salt
container 0L0763.
You will receive the “new” kit salt container + gasket + ring nut 0L1753 even if
you order the “old” salt container 0L0763.
Share more of our thinking at www.electrolux.com
3
/