Technical Bulletin
Identification:
Bulletin no:
Date:
Issuer:
Factory:
E01
VT2006-01
15-02-2006
Customer Support Dept.
Pordenone (Italy)
ELECTROLUX PROFESSIONAL p. 1 of 2
Subject:
NEW COOLING UNIT BASEMENT
Model:
Heavy Duty cabinets 1400 L (2 doors).
Problem:
The condensed water doesn’t flow into the evaporation basin, but
drops out the tile across the front panel and the frames.
Reason: Bad alignment between the tile and the water outlet of the
evaporator basement.
Action in
Factory:
The new basement is in production starting from week 3/2006.
Action in
Field:
In case of water leakage on appliance with the old basement:
make an extra seal all around the tile with silicon (as shown in the picture
on page 2
).
The new design of the basement tile:
VIALE TREVISO, 15 – 33170 PORDENONE – ITALY
TELEPHONE: TELEFAX: E-MAIL:
+ 39 0434 380 736 + 39 0434 380 740 gabriele.dal-bianco@electrolux.it
Technical Bulletin
Identification:
Bulletin no:
Date:
Issuer:
Factory:
E01
VT2006-01
15-02-2006
Customer Support Dept.
Pordenone (Italy)
ELECTROLUX PROFESSIONAL p. 2 of 2
The tile and the water flow on the old basement:
If the water flows as described in #2 we suggest to seal with silicon all around the tile:
Warning:make sure to dry the parts before sealing.
VIALE TREVISO, 15 – 33170 PORDENONE – ITALY
TELEPHONE: TELEFAX: E-MAIL:
+ 39 0434 380 736 + 39 0434 380 740 gabriele.dal-bianco@electrolux.it
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Electrolux FCG101 Datasheet
-
-
Electrolux RS05FD1F Datasheet
-
-
-
-
-
-
-