SPYPOINT IRB-W User manual

Page is loading ...

3

English

v.1.2

Thank you for choosing the SPYPOINT

®

Infrared Booster. This

manual will help you get the most out of your new device.

The IRB-W/IRB-W-B are wireless devices used to optimize infrared lighting

and increase quality for nighttime photos and videos.

FACEBOOK.COM/SPYPOINT

YOUTUBE.COM/SPYPOINTTRAILCAM

TWITTER.COM/SPYPOINTCAMERA

5

4

English

PACKAGE CONTENTS

• SPYPOINT

®

IR-Booster (IRB-W or IRB-W-B)

• Wireless transmitter

• Elastic

• Installation strap

FEATURES

LEDs • 100 LEDs

Type of LEDs • Infrared LEDs (IRB-W)

• Invisible LEDs (IRB-W-B)

Note : The lighting of the IRB-W-B is completely

invisible to the naked eyes in the dark.

2 levels of intensity • 50 or 100 LEDs

Triggering • Triggering by a wireless transmitter (included).

The transmitter is not necessary when used with

REMOS

TM

compatible cameras (IRB-W-B only).

Wireless range • 50 ft

REMOS

TM

technology

• IRB-W-B works with REMOS

TM

compatible cameras

IR-Booster

power source

• 4 D alkaline batteries (not included)

• 12V battery (KIT6V-12V, KIT-12V, BATT-12V) or

12V adapter (AD-12V), each sold separately.

Transmitter

power source

• 2 AAA alkaline batteries (not included)

Battery level • Low battery indicator

7

6

English

COMPONENTS

IR-Booster

Transmitter

1. Light sensor

2. Infrared or Invisible

LEDs

3. Battery life indicator

4. Slot for installation

strap

5. Cable lock hole

W

I

R

E

L

E

S

P INTSPY

TM

INTPSPY

D

+

D

+

D

+

D

+

1

2

3

4

5

W

I

R

E

L

E

S

P INTSPY

TM

INTPSPY

D

+

D

+

D

+

D

+

6 7 8

6. 100/50 LEDs

7. 12V power jack

8. OFF/ON

1. Strap clip

2. Battery case

3. Infrared sensor

4. Battery life indicator

5. OFF/ON

1

2

4 53

9

8

English

ALKALINE BATTERIES

IR-Booster

The IRB-W/IRB-W-B are powered by 4 D batteries

(1.5V), not included. To install the batteries, open

the cover on bottom side of the IRB-W/IRB-W-B.

Insert batteries as indicated, battery polarity must be

followed (+ and -).

Transmitter

The transmitter is powered by 2 AAA batteries (1.5V),

not included. To install batteries, turn the strap clip

and pull battery cover upwards. Insert batteries as

indicated in the battery compartment, battery polarity

must be followed (+ and -).

W

I

R

E

L

E

S

P INTSPY

TM

INTPSPY

D

+

D

+

D

+

D

+

POWER

BATTERY LEVEL

It is possible to know the battery level of the IRB-W/IRB-W-B and the

wireless transmitter when turned on. The battery life indicator will be on for

a period of 8 seconds when the batteries are full. When the indicator blinks

for 8 seconds, the batteries are low and need to be replaced. If the indicator

remains off, the batteries are completely empty or are possibly installed in the

wrong polarity (+ and -).

Tip: At each visit to the installation site of IRB-W/IRB-W-B and wireless

transmitter, make sure to verify the level of your batteries by doing the ON/

OFF procedure.

Note: The use of 50 or 100 LED mode has a direct influence on the energy

supplied by the batteries (50 LED is more efficient than 100 LED) and

therefore on the operation autonomy of the IRB-W/IRB-W-B.

11

10

English

INSTALLATION WITH THE TRANSMITTER

(IRB-W / IRB-W-B)

1. Maximum distance for wireless transfer between transmitter and IRB-W/

IRB-W-B is 50 ft.

2. Install the wireless transmitter on the camera strap with the strap clip.

3. Attach the infrared sensor in front of the cameras LED with the adjustable

elastic (included). See figure on the next page.

4. Turn on the transmitter and the IR-Booster.

Please note that the voltage of rechargeable (AAA and D) batteries

(1.2V) is insufficient to power the SPYPOINT

®

IR-Booster and

transmitter. We also recommend the use of new batteries to ensure maximum

performance of the devices.

Tip : During storage of IRB-W/IRB-W-B and wireless transmitter for more

than 30 days, remove batteries to avoid leaking problems.

EXTERNAL (12V)

IR-Booster

The IRB-W/IRB-W-B can also be powered by an external 12-volt DC input

such as a 12-volt battery (KIT-12V, BATT-12V or KIT6V/12V, sold separately)

or a 12-volt adapter (AD-12V, sold separately) to enhance its operation time.

For available accessories, refer to the AVAILABLE ACCESSORIES section.

13

12

English

INSTALLATION WITHOUT THE TRANSMITTER FOR

REMOS

TM

CAMERAS (IRB-W-B)

The transmitter is not neccessary when the IRB-W-B is used with

REMOS

TM

compatible cameras.

1. Activate the IR-BOOSTER option in the settings on a REMOS

TM

compatible

camera.

2. Turn on the IRB-W-B.

3. Install the IRB-W-B at a maximum of 4 ft above the ground (for hunting)

and on a stable surface (e.g. a tree). The wireless range betwen the camera

and the IRB-W-B is maximum 50 ft.

4. The IRB-W-B synchronizes with the infrared LEDs of the camera. It is

instantly triggered by a wireless signal when the camera takes a photo or

video.

5. Install the IRB-W/IRB-W-B at a maximum of 4 ft above the ground (for

hunting) and on a stable surface (e.g. a tree).

6. The transmitter synchronizes with the infrared LEDs of the camera.

The IR-Booster is instantly triggered by a wireless signal when the camera

takes a photo or video.

Wireless

transmitter

Installation strap

Infrared sensor

Elastic

15

14

NON-RECOMMENDED INSTALLATION

We do not recommend installing the IRB-W/IRB-W-B facing the camera to

avoid overexposure of the photos and videos.

IR

Infrared

camera

IRB-W /

IRB-W-B

Wireless

transmitter

English

RECOMMENDED INSTALLATION

IR

Infrared

camera

IRB-W /

IRB-W-B

Wireless

transmitter

IR

Infrared

camera

IRB-W /

IRB-W-B

Wireless

transmitter

17

16

English

Rechargeable 12V battery & charger set

#BATT-12V, 12-volt 7.0Ah rechargeable battery

and AC charger to power the Infrared Booster.

Rechargeable 6V-12V battery, charger & hou-

sing kit

#KIT6V-12V, Universal kit with two 6V rechar-

geable batteries (2.8Ah), with 6V (5.6Ah) and

12V (2.8Ah) output conguration and AC charger.

Water resistant ABS plastic case, 12 ft power cable

and strap included. Camo pattern. Compatible with

all SPYPOINT

®

products equipped with a 12V

power jack.

AVAILABLE ACCESSORIES

To obtain more information on the available accessories, go to

www.spypoint.com.

12V DC Power cable

#CB-12FT, 12 ft power cable with alligator clips

at one end to connect a 12V battery to an Infrared

Booster.

12-volt Adaptor

#AD-12V, AC adaptor (6V to 12V). Powers the

Infrared Booster from an electrical outlet.

19

18

English

WARRANTY AND REPAIR

This SPYPOINT

®

product designed by GG Telecom, is covered by a one (1)

year warranty on material and workmanship starting from the original date of

purchase. The sales receipt is your proof of purchase and must be presented

if warranty service is needed. This warranty will be honored in the country of

purchase only.

This warranty does not cover any GG Telecom product which has been

subjected to misuse, neglect and accidents or has been improperly used

or maintained. In addition, this warranty is not applicable for all products

purchased online from an unauthorized dealer. Any modifi cation or tampering

of the product will affect its operation, performance, durability and voids this

warranty.

Spare power cable

#PW-12FT, Spare 12 ft power cable, to connect the

Infrared Booster to the KIT-12V.

Rechargeable 12V battery, charger & housing

kit

#KIT-12V, 12-volt 7.0Ah rechargeable battery with

a water resistant ABS plastic case, AC charger,

12 ft power cable (#PW-12FT) and carrying strap

included. Compatible with all SPYPOINT

®

pro-

ducts equipped with a 12V power jack.

21

20

4. Write the RMA number on the outside of the package and send it to:

CANADA United States

GG Telecom GG Telecom

120 J.Aurèle-Roux 555 VT route 78

Victoriaville, QC Swanton, Vermont

G6T 0N5 05488

IMPORTANT: Under no circumstances will GG Telecom accept returned

products without a Return Material Authorization number (RMA). It is

essential to contact us before making a return.

The customer is liable for loss or damage to the product that may occur during

the transport to GG Telecom. We recommend you to use a traceable method

of shipping to ensure your protection.

WWW.SPYPOINT.COM

English

INSTRUCTIONS FOR REPAIR SERVICE

GG Telecom will repair the product without charge or replace it at its

discretion with an equivalent product, if it has a manufacturing defect covered

by the warranty described previously. We will pay the shipping costs only for

the return of the products covered by the warranty. The shipping costs for an

item sent to us will be assumed by the customer.

Repairs for damages not covered by the warranty will be subject to a

reasonable charge. The customer will pay all shipping costs.

1. BEFORE sending a product for repair, please contact our technical

support team at 1-888-779-7646 or [email protected]. Clearly

describe the problem and give a phone number where we can reach

you. It happens regularly that some problems can be solved over the

phone.

2. If a product needs to be sent, an RMA number will be given to the

customer (Return Merchandise Authorization).

3. Prepare a package for GG Telecom and include the original receipt or

a copy.

Page is loading ...

SPYPOINT IRB-W User manual

This manual is also suitable for

SPYPOINT IRB-W User manual

in other languages

Related papers

Other documents