2. TRIUMPH BOARD
  3. LiftBox

TRIUMPH BOARD LiftBox User manual

  • Hello! I'm a chat assistant that has read the installation manual for the TRIUMPH BOARD Connection Frame for LiftBox for IWB's. This manual provides instructions for assembling the frame, adjusting spring tension, and mounting an interactive whiteboard (IWB). I am ready to answer your questions about this device.
  • How to adjust the spring tension?
    How should I adjust the feet?
    Where the nuts (L) should be tightened from?
Connection Frame for LiftBox for IWB's
Installation manual
Connection Frame for LiftBox for IWB's
Contact us at:
[email protected]
www.triumphboard.com
www.youtube.com/user/triumphboard 902799-02
EAN: 8592580082474
910
8
Adjust spring tension to balance total weight, turn counter-clockwise 5 seconds left/right
Repeat until balance is set
Hang Triumph Board in final position Tighten nuts (L) from the back and
adjust the feet (I) to support the board
L (4x)
I(4x)
Connection Frame for LiftBox for IWB's
43
1
Contents of the box
Assemble 4x (4 mm)
Mount top and bottom base plates to
LiftBox®(not included)
(Holes X for mounting on LiftBox
650)
Mount tubes (C) to base plates
Mount support feet (I) in horizontal
beams
E:4x F:8x G:8x H:8x I:4x J:4x K:4x L:4x
F
G
E
2
E (4x)
B (1x)
A (1x)
C (2x)
C (2x)
F (8x)
D (2x)
D (2x)
G (8x)
H (8x)
5
J (4x)
K (4x)
L (4x)
Prepare brackets on whiteboard
I (4x)
6
Mount projector plate and projector (not
included)
7
A:1x
B:1x
C:2x
D:2x
Please refer to
LiftBox® user
manual!
PH
PH
5 mm
Mount horizontal beams(D) to base plates
Bracket 4x
not included
Hang interactive whiteboard with top on
bottom mounting holes
X (4x)
/