TRIUMPH BOARD LiftBoxes User manual

Type
User manual
LiftBox® for 84” LED LCD
Installation manual
LiftBox® for 84” LED LCD
Contact us at:
www.triumphboard.com
www.youtube.com/user/triumphboard
EAN: '8592580082467
7 8
9
Set the balance, use a drill-driver with a 13 mm socket on 2 outer springs marked green
Drive counter clockwise 5 seconds each until balanced
Mount wall frame covers and
Application cover (optional) Mount the touchscreen, use
LiftBox accessories
LiftBox® for 84” LED LCD
1 2
3
5
4
6
Remove application cover (optional) Remove wall-frame covers Lift LiftBox on wall bracket, mark top
holes. Take LiftBox down and drill holes Fix LiftBox at the top.
Then level and fix at the bottom
Remove wall bracket Mount bottom wall bracket level to the wall
Safety warnings, contents of the box, tools needed
Mounting height
calculator on:
www.triumphboard.com
*Fasteners not included
Choose based on type of wall
Use 4x 8mm
(Not included)
  • Page 1 1
  • Page 2 2

TRIUMPH BOARD LiftBoxes User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI