2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. TRIUMPH BOARD
  7. LiftBox

TRIUMPH BOARD LiftBox User manual

  • Hello! I've reviewed the installation manual for the TRIUMPH BOARD LiftBox Floor Support for IWB's and LED LCD's. This document provides crucial details on mounting to various wall types using minimum 2 fixation points per bracket, and assembly. I'm ready to help answer any questions you have about the device and its installation.
  • What is the minimum number of fixation points per bracket?
    What type of screws should be used for wood-stud drywall?
    What should I do when mounting on studded plastered drywalls?
order number: 481A42
Floor Support for LiftBox for IWB's and LED LCD's
Installation manual
Floor Support for LiftBox for IWB's and LED LCD's
Contact us at:
[email protected]
www.triumphboard.com
www.youtube.com/user/triumphboard
EAN: 8592580082498
606
24"
406
16"
406
16"
Important:
When mounting on
studded plastered
drywalls
always mount to the
studs in the wall.
(common stud distances
shown in the sketch)
Use minimum 2 fixation
points per bracket.
Fischer UX 10 mm
Wurth Master 10 mm
DIN 571 8 x 70 mm.
diam. 5/16¨ x 3¨
DIN 571 8 x 70 mm.
diam. 5/16¨ x 3¨
Toggler Snaptoggle BE
diam. M8 or 5/16¨ -18
wood-stud
drywall
wood-stud
drywall
metal-stud
drywall
ADVISED MOUNTING HARDWAREWALL TYPE
Floor Support for LiftBox for IWB's and LED LCD's
10
6
11 1
4
3 2
5
7 9 8
Contents of the box
Assemble 2 legs (5mm) Assemble 3x ( 5 mm) Assemble 4x ( 4 mm) Hang LiftBox (*) and fix at
bottom, use screw N ( 5
mm)
NOTE: careful not to
damage grey plastic
dampener!
Set height and align top
level Measure 494mm and fix
( 4 mm) Assemble top and bottom
4x
Fix 3 brackets to the wall
fasteners not included Fix TOP bracket (5mm) Fix bottom bracket (5mm)
F
* Please refer to
LiftBox® user manual!
Mount cover strips with
double sided tape
G:4x H:4x I:12x J:12x K:4x L:4x M:14X N:2X
A
B
A:2x
B:4x
C:3x
D:1x
E:1x
F:2x
B
F
M M
B C
H
Min 2 screws per bracket
I
J K
D E
K
N
G B
L
/