2. Fishbone Offroad
  3. FB25093

Fishbone Offroad FB25093 Installation guide

  • Hello! I've reviewed the installation instructions for the Fishbone Offroad Flashlight Mount JL Wrangler FB25093. This document provides clear, step-by-step instructions on how to install the mount on your Jeep's rear roll bar using a Torx T25 screwdriver and the existing screws. Feel free to ask me any questions regarding the installation process or features of the mount.
  • What tool is required for installation?
    How many Torx screws are removed during installation?
    Where are the removed Torx screws located?
FB25093
Jeep® JL Wrangler
Rear Roll Bar Flashlight Mount
2509300
REQUIRED TOOLS
Torx T25 Screw Driver
KIT CONTAINS
Flashlight mount
QTY
1
1. OPEN TAILGATE
2. LOCATE TORX SCREWS.
Remove the three T-25 Torx Screws on top of the
roll cage. Two facing the rear and one Facing the
front of the vehicle
3. PLACE FLASHLIGHT MOUNT ONTO ROLL CAGE
4. SECURE FLASHLIGHT MOUNT
Reusing the three T-25 Torx Screws secure the
flashlight mount
5. INSTALL FLASHLIGHT.
/