2. Fishbone Offroad
  3. FB25105

Fishbone Offroad FB25105 Installation guide

  • I've reviewed the user manual for the Fishbone Offroad XJ Wrangler Front Seat Flashlight Mount. It includes instructions on how to mount the flashlight attachment using existing seat bolts, as well as what tools are needed. I'm ready to answer any questions you have about the product.
  • What tools are required for installation?
    What is the torque specification for the seat bolts?
    What type of flashlight does this mount fit?
FB25105
Jeep® XJ Wrangler
Front Seat Flashlight Mount
2510500
REQUIRED TOOLS
13MM Socket
Torque Wrench
KIT CONTAINS
Flashlight mount
QTY
1
1. REMOVE SEAT BOLTS
Locate the two front-most seat bolts on either the
driver or passenger side. ………………………………………..
Remove them with a 13MM Socket.
2. INSTALL FLASHLIGHT MOUNT
Place the mount over the bolt holes.
Secure it by replacing the seat bolts with a torque of
35 ft-lbs. …………………………………………………………………
FB25105
Jeep® XJ Wrangler
Front Seat Flashlight Mount
2 2510500
3. INSTALL FLASHLIGHT
Secure your flashlight of choice into the brackets. It
will fit any D-cell battery light. ……………………………
ENJOY YOUR NEW XJ FLASHLIGHT MOUNT!
/