Fishbone Offroad FB25093 Installation guide

FB25093

Jeep® JL Wrangler

Rear Roll Bar Flashlight Mount

2509300

REQUIRED TOOLS

Torx T25 Screw Driver

KIT CONTAINS

Flashlight mount

QTY

1. OPEN TAILGATE

2. LOCATE TORX SCREWS.

Remove the three T-25 Torx Screws on top of the

roll cage. Two facing the rear and one Facing the

front of the vehicle

3. PLACE FLASHLIGHT MOUNT ONTO ROLL CAGE

4. SECURE FLASHLIGHT MOUNT

Reusing the three T-25 Torx Screws secure the

flashlight mount

5. INSTALL FLASHLIGHT.

Download PDF