2. Fishbone Offroad
  3. FB31058

Fishbone Offroad FB31058 Installation guide

  • Hello! I've reviewed the installation instructions for the FISHBONE OFFROAD BackSide plate for the Jeep TJ Wrangler. This document outlines the steps for mounting the plate, including removing your spare tire and using the factory bolts. I am ready to assist you with any questions you may have about the installation process or the product itself.
  • What tools are needed for installation?
    What does the kit contain?
    What is the first step in installation?
FB31058
Jeep® TJ Wrangler
BackSide Plate
3105800
REQUIRED TOOLS
½” Socket
KIT CONTAINS
BackSide plate
Plastic plug
QTY
1
1
1) REMOVE YOUR SPARE TIRE
Begin by removing your spare tire or other
aftermarket accessories from your tailgate.
2) INSTALL BACKSIDE
Using the four (4) OEM bolts and the ½” socket,
install the BackSide plate to your Jeep.
3) INSTALL PLUG
Insert the provided plug into the hole for the factory
3rd brake light harness.
4) ENJOY YOUR NEW FISHBONE OFFROAD BACKSIDE!
/