2. HiB
  3. Angled Grab Rail

HiB Angled Grab Rail Fitting Instructions

  • Hello! I've reviewed the HiB fitting instructions for the ACCACH03 and ACCACH04 Angled Grab Rail. This document provides guidance on installing the grab rail on various wall surfaces, with special notes for tile and plasterboard walls. I am ready to answer any questions you have about the installation process or product features.
  • What type of drill bit should be used for drilling through tiles?
    What should be done when the wall is plasterboard?
    What should be done if the product gets wet?
Ø8
60mm
Angled Grab Rail - Fitting Instructions
Installation Guideline
Care Instructions
• Using a suitable drill bit, drill holes in the marked positions to a suitable depth. If drilling through tile, use a ceramic drill bit.
• Insert wall plugs level with the surface of the wall. If fitting to a tiled surface, wall plugs should be inserted below the tile
surface to avoid cracking. NB. For plasterboard walls, specialist fixings should be purchased, available from any DIY or
hardware store.
• Fig.8 - Ensure the retaining grub screw is installed securely.
• Do not use abrasives or solvents when cleaning this product.
• Wipe off all water spillages as soon as possible using a so, damp cloth.
FI#10 014 R200616 Ver No. 1.0 Oct 2020
ACCACH04
ACCACH03
/