Astonica 50105597 User manual

Type
User manual

This manual is also suitable for

Astonica 50105597 is a 42" round table, intended for residential, non-commercial use. The table is designed for easy assembly, with adjustable feet to ensure it stands level on uneven surfaces. The table is made of aluminum, which is a lightweight and durable material. It is easy to clean and maintain, making it a great choice for both indoor and outdoor use.

Astonica 50105597 is a 42" round table, intended for residential, non-commercial use. The table is designed for easy assembly, with adjustable feet to ensure it stands level on uneven surfaces. The table is made of aluminum, which is a lightweight and durable material. It is easy to clean and maintain, making it a great choice for both indoor and outdoor use.

IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CUSTOMER SERVICE AT
1-888-424-3354
141205rev1
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER, CONTACT CONSUMER SUPPORT AT
1-888-424-3354
OR
IF YOU ARE A STORE MANAGER OR EMPLOYEE IN NEED OF ASSISTANCE CALL
1-888-851-5569
PLEASE HAVE YOUR STORE NUMBER READY
Limited Warranty
World Factory, Inc.
®
Products for Home Use
World Factory, Inc.
®
(Seller) warrants to the original Buyer only, that each Astonica
®
Product will be
free from defects in material and workmanship for a period of one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH
ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE
SELLER WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY
FROM REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER
MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This
warranty does not apply to damage, heat-induced coloration changes, scratching or alteration due to
normal use or weathering. To make a claim under this Limited Warranty, you must return the complete
product with proof of purchase, transportation prepaid, to any World Factory, Inc.
®
authorized service
center. Call 1-888-424-3354 for the location of the nearest authorized service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1)
YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR
LOSS OF PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if
such invalid and/or unenforceable provision had never been contained herein.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
®
Made in China
©2005 World Factory, Inc.
Distributed by:
World Factory, Inc.
Coppell, TX 75019
Model No: 50105597
Claremont 42" Round Table
Instruction Manual
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.
NOTE: This product is intended for residential, non-commercial use.
IF YOU HAVE ANY PROBLEMS OR QUESTIONS CONCERNING THIS PRODUCT,
DO NOT RETURN IT TO YOUR RETAILER. CONTACT CUSTOMER SERVICE AT
1-888-424-3354.
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
CAUTION: Do not over tighten threaded studs, aluminum is a soft metal
and threads can easily be stripped.
1.(SEE FIGURE 1) Place table top (A) upside down on a flat, non-scratching surface.
2.Locate threaded holes under table top (A), and install threaded studs (eight places).
3.Install threaded studs (E) into table legs (B). Repeat with other three table legs (B).
4.Place table leg (B) upside down, and mount legs to table using mounting hardware,
flat washers (G), lock washers (H) and nuts (F).
5.Align support ring (C) and one table leg (B). Ensure ring tabs on support ring are facing
upward, join with mounting hardware flat washers (G), lock washers (H) and hex nuts (F).
Hand tighten only to hold it in place. Repeat with other three table legs.
6.Stand the table upright and securely tighten hardware in an “X” pattern.
7.Fix the adjustable feet (D) under table legs (B). Adjust feet until table stands level.
A
B
C
D
F
ASSEMBLY INSTRUCTIONS
Figure 1
E
PARTS AND HARDWARE LIST
G
H
Table Top
Leg
Support Ring
Threaded Stud, 8mm
Lock Washer, 8mm
Hex Nut, 8mm
Flat Washer, 8mm
1
4
1
16
Adjustable Foot 4
16
16
16
A
B
GF
D
E
H
A
E
G
H
F
C
D
DESCRIPTION
PART #
QUANTITY
G
H
F
C
B
2
1
NOTE: This product is intended for residential, non-commercial use.
  • Page 1 1
  • Page 2 2

Astonica 50105597 User manual

Type
User manual
This manual is also suitable for

Astonica 50105597 is a 42" round table, intended for residential, non-commercial use. The table is designed for easy assembly, with adjustable feet to ensure it stands level on uneven surfaces. The table is made of aluminum, which is a lightweight and durable material. It is easy to clean and maintain, making it a great choice for both indoor and outdoor use.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI