Astonica 50102456 User manual

Astonica
Brand
Astonica
Model
50102456
Type
User manual

This manual is also suitable for

Astonica 50102456 is a 40" round dining table. It is intended for residential, non-commercial use. The table is made of durable materials and is easy to assemble. It is a great addition to any home and can be used for a variety of purposes, such as dining, entertaining, or working. Assembly is simple and requires no special tools or skills. With its classic design and sturdy construction, the Astonica 50102456 40" round dining table is a versatile and stylish piece of furniture that will provide years of enjoyment.

Astonica 50102456 is a 40" round dining table. It is intended for residential, non-commercial use. The table is made of durable materials and is easy to assemble. It is a great addition to any home and can be used for a variety of purposes, such as dining, entertaining, or working. Assembly is simple and requires no special tools or skills. With its classic design and sturdy construction, the Astonica 50102456 40" round dining table is a versatile and stylish piece of furniture that will provide years of enjoyment.

311012rev1
®
Model No: 50103511
Fun-N-Sun 40"
Round Dining Table
Instruction Manual
Read the instructions and precautions before use of this product
Please keep this instruction manual for future reference
For warranty information, please refer to the back page of
this instruction manual.
Due to ongoing product development
the actual product or products may vary from
the illustrations or photos shown within this manual.
NOTE: This product is intended for residential, non-commercial use.
Made in China
©2012 World Factory, Inc.
Distributed by:
World Factory, Inc.
Westlake, TX 76262
For Manuals, Replacement Parts or Customer Service visit:
www.ezreplacement.com
Limited Warranty
World Factory, Inc. Products for Home Use
World Factory, Inc. (Seller) warrants to the original Buyer only, that each Astonica Product will be free
from defects in material and workmanship for a period of one (1) year from date of purchase.
SELLER’S SOLE OBLIGATION AND BUYER’S EXCLUSIVE REMEDY UNDER THIS LIMITED
WARRANTY SHALL BE THE REPAIR OR REPLACEMENT OF PARTS, WITHOUT CHARGE, WHICH
ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. ANY PARTS AS DETERMINED BY THE SELLER
WHICH HAVE BEEN MISUSED; ABUSED OR DAMAGED EITHER DIRECTLY OR INDIRECTLY FROM
REPAIRS OR ALTERATIONS ATTEMPTED BY UNAUTHORIZED PERSONS; IMPROPER
MAINTENANCE, NEGLECT OR ACCIDENT ARE NOT COVERED BY THIS LIMITED WARRANTY. This
warranty does not apply to damage, heat-induced coloration changes, scratching or alteration due to
normal use or weathering. To make a claim under this Limited Warranty, you must return the complete
product with proof of purchase, transportation prepaid, to any World Factory, Inc. authorized service
center. Call 1-888-422-7800 or visit: ezreplacement.com for the location of the nearest authorized
service center.
Additional Limitations
THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY OR CONSUMABLE ITEMS RELATED
TO THIS PRODUCT. ALL IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE (1)
YEAR FROM DATE OF PURCHASE. IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LIABILITY FOR LOSS OF
PROFITS, ARISING FROM THE SALE OR USE OF THIS PRODUCT.
If any provision of this Limited Warranty is for any reason held to be invalid or unenforceable, such
provision shall not affect any other provision herein, this Limited Warranty shall be construed as if
such invalid and/or unenforceable provision had never been contained herein.
This warranty gives you special legal rights, and you may also have other rights which vary from state
to state.
This Warranty contains the entire agreement between Seller and Buyer and supersedes any and all
prior agreements, arrangements, or understandings between the parties relating to product warranty.
ASSEMBLY INSTRUCTIONS
CAUTION: Do not over tighten fasteners.
A
B
C
DFGE
Figure 1
PARTS & HARDWARE LIST
PART # DESCRIPTION QUANTITY
A Table Top 1
B Table Legs 4
C Leg Connector Bracket 1
D Plastic Bolt Cap 8
E Lock Washer 8
F Hex Bolt 8
G Hex Key 1
A
C
E
F
1. Place the table top (A) upside down on a flat non-scratch surface.
2. Insert table legs (B) into leg fittings of table top (A).
3. Place leg connector bracket (C) between table legs (B) and secure
with hex bolts (F), and lock washers (E). Finger tighten only.
Repeat this step for all four legs.
4. Carefully rotate table assembly to upright position. Tighten bolts (F)
with hex key (G).
5. Insert plastic bolt caps (D) over hex bolts (F).
Carefully remove the contents from the package. If any parts are missing do not
attempt to use the product until they have been obtained and correctly installed.
Parts Detail
1
NOTE: This product is intended for residential, non-commercial use.
2
D
G
B
  • Page 1 1
  • Page 2 2

Astonica 50102456 User manual

Astonica
Brand
Astonica
Model
50102456
Type
User manual
This manual is also suitable for

Astonica 50102456 is a 40" round dining table. It is intended for residential, non-commercial use. The table is made of durable materials and is easy to assemble. It is a great addition to any home and can be used for a variety of purposes, such as dining, entertaining, or working. Assembly is simple and requires no special tools or skills. With its classic design and sturdy construction, the Astonica 50102456 40" round dining table is a versatile and stylish piece of furniture that will provide years of enjoyment.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents