Legrand LMLS-500-U Installation guide

Brand: Legrand

Model: LMLS-500-U

Type: Installation guide

Wattstopper

DLM - Photosensor Mounting Brackets

Installation Instructions • Instructions d’Installation • Instrucciones de Instalación

No: 24616 – 10/16 rev. 1

Catalog Number • Numéro de Catalogue • Número de Catálogo: LMLS-MB1-MB2

Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China

DESCRIPTION

The LMLS-MB1 and LMLS-MB2 mounting brackets provide the flexibility to mount the LMLS-400 and LMLS-500 Photosensors to walls,

skylight wells, or J-Boxes. They are specifically designed to be used in conjunction with these Photosensors.

LMLS-MB1 J-Box Mounted

LMLS-MB2 Skylight Wall Mounted

SPECIFICATIONS

Material: ..................................................... ABS, UL 94 5V

..........................................Flame Retardant Material

.........................................................Indoor Use Only

Mounting Options:

LMLS-MB1 ........................................4-Square J-Box

............................................................ 2-Gang J-Box

LMLS-MB2 ...........................................Screw to Wall

...........................Tape to wall with double sided tape

LMLS-MB1

LMLS-MB2

Surface Mount using LMLS-MB1 Mounting Bracket

Ceiling Mounting bracket

Ceiling or Ceiling Tile

Surface Mount

using LMLS-MB2

Mounting Bracket

Mounting bracket

Cabling

Remove

tab

Skylight light well

LMLS-MB1 MOUNTING OPTIONS

The LMLS-MB1 is designed to be able to mount to a standard 4” square

junction box as well as a 2-gang junction box. Using a small screwdriver,

punch out the holes for the corresponding junction box. Holes are clearly

marked on the rear side of mounting plate.

Mounting plate back view

LMLS-MB1 MOUNTING INSTRUCTIONS

Mounting to the Junction Box

After punching out the holes, use the provided screws to mount the

LMLS-MB1 to the corresponding junction box as shown.

Connecting the RJ-45 Cable

1. Run RJ-45 cable through the J-Box.

2. Connect the RJ-45 cable and photosensor as shown.

3. Slide sensor into the LMLS-MB1 to finish.

Run RJ-45 cable

through J-Box.

Slide sensor into the

LMLS-MB1 to finish.

LMLS-MB2 MOUNTING OPTIONS

The LMLS-MB2 can be mounted to a wall with the provided screws or by using the double-sided tape. Using the provided template,

marking the wall with appropriate hole spacings is made easy. The LMLS-MB2 has a small break-away tab at the bottom of the bracket

for use when running the RJ-45 cable on the wall surface if desired.

For the screw holes, use a #40 drill gauge bit size to drill a 0.098”pilot hole. If drilling through a wall the recommended hole size

diameter to drill for the cable is 0.875”.

2-gang

Hole for

4"Square

J-box

2-gang

2-gang 2-gang

Hole for

2-gang

wall box

Hole for

2-gang

wall box

Hole for

4"Square

J-box

Hole for

2-gang

wall box

Hole for

2-gang

wall box

Mounting to a

4” square Jbox

Mounting to a

2 gang wall box

4 square J-Box

2 screws

2 gang

4 screws

LMLSMB-2 MOUNTING WITH DOUBLE-SIDED TAPE

The LMLS-MB2 can be mounted to a wall using the double-sided tape. Using the

provided template, mark the wall with the appropriate hole spacings. The LMLS-MB2

has a small break-away tab at the bottom of the bracket for use when running the

RJ-45 cable on the wall surface, if desired.

Remove tab

when running RJ-45 cable

on the wall surface

Hole size diameter to

drill for cable is 0.875"

0.098"pilot

holes

Align screw holes on

mounting bracket to

markings on wall.

Cable goes

through wall

Cable goes

on wall surface

Mounting when running the

RJ-45 cable through wall.

Mounting when running the RJ-

45 cable on the wall surface.

Slide sensor into the

LMLS-MB2 wall mount

bracket to finish.

Plug RJ-45

cable into

the RJ45

socket on

the end of

the unit.

RJ-45 Cable Going

Through Wall

RJ-45 Cable Run

on the Wall Surface

Use template to mark

wall with appropriate

hole spacings.

1. Use template to mark wall with

appropriate hole spacings.

2. Drill screw pilot holes using #40 drill bit.

3. Use provided screws to mount

the LMLS-MB2 to the wall.

0.098” pilot

holes

0.098” pilot

holes

Template hole size

diameter to drill or

cable is 0.875”

LMLS-MB2 MOUNTING WITH SCREWS

Placement Example

when mounting with screws

Wiring Detail

Connect RJ-45 cable and photosensor as shown.

Run RJ-45 cable

through wall.

800.879.8585

www.legrand.us/wattstopper

No. 24616 – 10/16 rev. 1

Wattstopper warranties its products to be free

of defects in materials and workmanship for a

period of five (5) years. There are no obligations

or liabilities on the part of Wattstopper for

consequential damages arising out of, or in

connection with, the use or performance of this

product or other indirect damages with respect

to loss of property, revenue or profit, or cost of

removal, installation or reinstallation.

Wattstopper garantit que ses produits sont

exempts de défauts de matériaux et de fabrication

pour une période de cinq (5) ans. Wattstopper

ne peut être tenu responsable de tout dommage

consécutif causé par ou lié à l’utilisation ou

à la performance de ce produit ou tout autre

dommage indirect lié à la perte de propriété, de

revenus, ou de profits, ou aux coûts d’enlèvement,

d’installation ou de réinstallation.

Wattstopper garantiza que sus productos

están libres de defectos en materiales y mano

de obra por un período de cinco (5) años. No

existen obligaciones ni responsabilidades por

parte de Wattstopper por daños consecuentes

que se deriven o estén relacionados con el

uso o el rendimiento de este producto u otros

daños indirectos con respecto a la pérdida

de propiedad, renta o ganancias, o al costo

de extracción, instalación o reinstalación.

WARRANTY INFORMATION INFORMATIONS RELATIVES À LA GARANTIE INFORMACIÓN DE LA GARANTÍA

Cable goes

through wall

Cable goes

on wall surface

Mounting when running the

RJ-45 cable through wall.

Mounting when running the RJ-

45 cable on the wall surface.

Template hole size

diameter to drill for

cable is 0.875".

Tape

Visually align to markers on

wall, then press on wall.

Apply tape to rear

recess as shown.

Remove tab

when running RJ-45 cable

on the wall surface

Connect RJ-45 cable

and photosensor as

shown.

RJ-45 Cable Going

Through Wall

RJ-45 Cable Run

on the Wall Surface

Slide sensor into the

LMLS-MB2 wall mount

bracket to finish.

Placement Example

when mounting with double sided tape

Mounting Instructions

Wiring Detail

Legrand LMLS-500-U Installation guide

Legrand LMLS-500-U Installation guide

Legrand LMLS-500-U Installation guide

Related papers

Other documents