Amano MJR-7000EZ Owner's manual

Brand: Amano

Model: MJR-7000EZ

Type: Owner's manual

15

OPERATIONS:

ACCUMULATED DATA CORRECTION

(BY INDIVIDUAL)

1. Set the key switch to FUNCTION mode. The display will go blank.

2. Press I to enter the Data Correction

mode. The display will show the I in the

upper left hand corner.

3. Insert the time card to be corrected and

remove card. The amount of regular hours

worked will be displayed.

4. Press E until the desired code appears on

the display. For example, choose code #2 to

add overtime hours.

Weekly Net Hours

To adjust net hours for the

current week. This affects codes

#2 and #3 based on weekly

overtime calculation rule.

Regular Hours

To adjust the

accumulated regular

hours for the current pay

period. This does not

affect any other codes.

Overtime Category A Hours

To adjust accumulated hours

sorted to overtime (A). This

does not affect any other

codes.

5. Key in the number of hours to be added or

subtracted. For example, to add 3 hours,

press 300

6. Press + or - to update the display. The

hours are added to the previous amount

displayed.

7. Press E to advance to the next code

number.

8. Insert the employee's time card for the

correction to be printed on the time card.

9. Turn the key switch to NORMAL mode.

Page is loading ...

Page is loading ...

Page is loading ...

Page is loading ...

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24

Amano MJR-7000EZ Owner's manual

Brand: Amano

Model: MJR-7000EZ

Type: Owner's manual

Download PDF

Related papers

Other documents