Using your new Reflector
Reflector Kit
5
in
1
1. Remove the 5-in-1 Reflector from the carry bag
and unfold until it forms a flat circle. Please note
the zippered cover may be turned inside out
exposing multiple colored surfaces.
2. When using the diuser, place directly between
the subject and the sun, making sure to position
it far enough over head to completely eliminate
all harsh shadows.
3. When using a reflective surface, first find the light
source (direct sunlight or studio lighting). Turn
the reflector directly into this light source and
then aim or bounce back onto your subject. Pay
special attention to ensure you are controlling
the amount of reflectiveness by moving the
reflector forward or backwards.
4. Use of a reflector holder is highly recommended.
Visit fjwestcott.com and search #302 Reflector
Holder to learn more.
For added assurance, register your reflector at
````` fjwestcott.com/warranty