2. NEXTION
  3. NEXTION Enhanced 3.5" NX4832K035 UART HMI Resistive Touch Screen TFT LCD Display Module 480x320 for Arduino Raspberry Pi ESP8266

NEXTION NEXTION Enhanced 3.5" NX4832K035 UART HMI Resistive Touch Screen TFT LCD Display Module 480x320 for Arduino Raspberry Pi ESP8266, Nextion 3.2 inch Display NX4024T032 Resistive Touch Screen UART HMI TFT LCD Module 400x240 for Arduino Raspberry Pi ESP8266 User manual

  • Hello! I am an AI chatbot trained to assist you with the NEXTION NEXTION Enhanced 3.5" NX4832K035 UART HMI Resistive Touch Screen TFT LCD Display Module 480x320 for Arduino Raspberry Pi ESP8266 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.diymalls.com [email protected]
How to upload tft file to NEXTION
Download NEXTION EDITOR from this link:
https://nextion.tech/nextion-editor/#_section1
Format your TF card and make sure it is FAT32:
Open NEXTION EDITOR, then open HMI file
Click compile, it will show as below
www.diymalls.com [email protected]
www.diymalls.com [email protected]
Click File-FTF file output
Save this TFT file in your TF card
Insert your TF card to the NEXTION TF card slot, power the NEXTION, then it will upload
successfully
/