MacDon MD #214395 A M1 Series is a fuel tank drain update kit for M1 Series Windrowers from model years 2016 and 2017. It includes an O-ring, a conical brass washer, and a brass nut. The kit can be installed with fuel in the tank, but spill containment should be available in case the fitting is accidentally pushed into the tank. Installation requires the use of a thread sealant that is compatible with both diesel fuel and the NBR rubber O-ring. The recommended sealant is Permatex Aviation Form-A-Gasket #3. A small length of strong string or mechanics wire will also be needed.
MacDon MD #214395 A M1 Series is a fuel tank drain update kit for M1 Series Windrowers from model years 2016 and 2017. It includes an O-ring, a conical brass washer, and a brass nut. The kit can be installed with fuel in the tank, but spill containment should be available in case the fitting is accidentally pushed into the tank. Installation requires the use of a thread sealant that is compatible with both diesel fuel and the NBR rubber O-ring. The recommended sealant is Permatex Aviation Form-A-Gasket #3. A small length of strong string or mechanics wire will also be needed.
MacDon MD #214395 A M1 Series is a fuel tank drain update kit for M1 Series Windrowers from model years 2016 and 2017. It includes an O-ring, a conical brass washer, and a brass nut. The kit can be installed with fuel in the tank, but spill containment should be available in case the fitting is accidentally pushed into the tank. Installation requires the use of a thread sealant that is compatible with both diesel fuel and the NBR rubber O-ring. The recommended sealant is Permatex Aviation Form-A-Gasket #3. A small length of strong string or mechanics wire will also be needed.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI