Cerio OW-400 4N00-MESH Quick Installation Guide

Type
Quick Installation Guide
OW-400 4N00-MESH
eXtreme High Power WiFi6 Dual-Radio
MAN-MESH Outdoor PoE Bridge/AP
Quick Installation Guide
GUI Setting Instructions
Product default IP address : 192.168.2.254
Product default Account : root / Password : default
Set the IP segment of the administrator's computer to be in the same
range as this device for accessing the system. E.g. 192.168.2.100, after
open your Browser enter IP address http://192.168.2.254 in the URL field
Enter GUI management interface. Login message will appear when you
successfully enter the management interface.
Please use default Users name:
root and default password
default to login.
If you have advanced setting and
more question please refer to our
user manual
Product Overview
Product LED Description
Products Description
OW-400 4N00-MESH:
2N-Type external connectors for 2.4G and 2N-Type external
connectors for 5G design.
Package Contents
Before you start to install this device, please verify your package
that contains the following items:
Package Contents
QTY
Main Unit
x1
PoE Power supply Kit
x1
Quick Installation Guide
x1
Warranty Card
x1
Adjustable Mounting Bracket Set
x1
Note: If any of these items is found missing or damaged, please contact
your local supplier for replacement.
PoE Setup Instructions
1. Power : PoE on and system ready
2. Eth1 : Eth1 link connection(1Gbps Ethernet Speed Port)
3. Eth2 : Eth2 link connection(2.5Gbps Ethernet Speed Port)
4. Radio 2.4GHz : 2.4GHz radio is enabled
5. Radio 5GHz : 5GHz radio is enabled
OW-400 4N00-MESH
2.5G ETH2 / PoE in
Reset Button
1G ETH1 / PoE in
Protection
LED
Pressure Vent
Metal Corrosion-
Resistant Casing
Function Port
Aluminum
Adjustable
Bracket Holes
OW-400 4N00-MESH Antenna Overview
Power Eth1 Eth2 Radio
V1.0
PoE in
Data Transfer Input
Power + Data output
Power Adapter DC in
External for 2.4GHz
N-Type Connecter
External for 2.4GHz
N-Type Connecter
External for 5GHz
N-Type Connecter
External for 5GHz
N-Type Connecter
* Host power port input can be selected as
1Gbps ETH1 / PoE in port access or
2.5Gbps ETH2 / PoE in port access
*Two RJ45 waterproof connectors are included in the accessory box. When
installing, please make sure to tighten them securely to achieve the waterproof.
Hardware Overview
1
2
3
with mounting kit user guide
Locked on the Clamps
Wall Mounting Kit
Pole Bracket
Hose clamp
Cerio Corporation
M6 Drop in Anchors │
Opening Size : Diameter 8mm / Depth 25mm
Ø6mm
25mm
Hole Range│121mm / Ø6.5mm
Pole Range│Ø60-Ø90mm
Pole Range│Ø40-Ø80mm
Main Device Bracket
Pole Bracket
Clamps x1
Bracket
Connecting Bolt
Locked the bracket kit on the device
Pole Bracket Clamps x1 Pole Bracket O-type
hose Clamps x2
Pole Bracket Clamps x2
Locked on the pole
Locked to the wall
Mounting to the pole
Mounting to the pole
OW-400 4N00-MESH
  • Page 1 1
  • Page 2 2

Cerio OW-400 4N00-MESH Quick Installation Guide

Type
Quick Installation Guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages