Plus N-204 User manual

Brand: Plus

Model: N-204

Type: User manual

This manual is also suitable for

Copyboard

N-20S/N-20W/N-204

User’s Manual

Thank you for your purchase of the PLUS Copyboard.

Please read this User’s Manual carefully before use to take full advan-

tage of the functions of this product. After you have finished reading

the manual, please keep it for future reference.

E-2

Introduction

This manual is for the N-20S, N-20W, and N-204 models.

The N-20 copyboard exists in three types: the standard size (model N-20S), the wide size (model N-20W)

and the 4-screen type (model N-204).

The descriptions and diagrams in this manual refer to the model N-20S.

* When functions or operations are specific to a certain model of copyboard, the model name is specified.

Cautions on using networks

About the network connection environment

• Therequiredoperatingenvironmentissubjecttochangewithoutnotice.Also,PLUSdoesnotguaranteealloperations.

• Evenif allrequiredoperatingenvironmentconditionsaremet,itmayhappenthatoperationsdonot workproperlyorthat

someproblemsarise.Dependingonthecommunicationsstatus,displaysmaybedelayedandcommunicationerrorsmay

occur.

Disclaimer

• PLUSwillacceptnoresponsibilitywhatsoeverforanyconsequencesofproblemsof communication impediments in con-

necteddevicesduetothenetworkfunctions.

• PLUSwillacceptnoresponsibilitywhatsoeverforimpedimentsincidentaltousageofortheinabilitytousethenetworkfunc-

tions(lossofbusinessprofits,lossesduetointerruptionofactivities,etc.).

• PLUSwillacceptnoresponsibilitywhatsoeverformalfunctionsduetocombinationswithconnecteddevicesorthesoftware

used,norfordamagesarisingfromhang-up,etc.

NOTE

Do not use ruled type tapes.

Donotmovethesheetwithtape,etc.,attachedtoit.Doingsocouldresultinmalfunction.

Do not attach template sheets or paper to the sheet.

Donotcopywhilefilm-typeobjectsorpapersareattachtothesheet.Doingsocouldresultinmalfunction.

Trademarks

• MicrosoftandWindowsareregisteredtrademarksortrademarksintheUnitedStatesandothercountriesoftheMicrosoftCor-

poration.

• AdobeandAdobeAcrobatReaderaretrademarksofAdobeSystemsIncorporated.

• Safari,Apple,MacOSandMacintosharetrademarksorregisteredtrademarkofAppleComputer,Inc.,oftheUnitedStates.

Thetrademarksofthevariouscompaniesandtheproducttrademarks,evenwhennotwrittendown,willbegivenduerespect.

Productnamesandcompanynamesappearinginthismanualareregisteredtrademarksortrademarksoftherespectivecompa-

nies.

(1) Thecontentsofthismanualmaynotbereprintedinpartorwholewithoutpermission.

(2) Thecontentsofthismanualaresubjecttochangewithoutnotice.

(3) Greatcarehasbeentakeninthecreationofthismanual;however,shouldanyquestionablepoints,errors,oromissionsbe

apparent,pleasecontactus.

(4) NotwithstandingSection(3),thiscompanywillnotberesponsibleforanyclaimsoflossorprofitorothermattersdeemedto

betheresultofusingthisunit.

(5) TheuseofaprinterastheperipheraldeviceofthePLUSCopyboardistakentobeaprerequisite;therefore,operationwillnot

beguaranteedwhentheprinterisusedwithadirectconnectiontoapersonalcomputer.

(6) Manualswithincorrectcollatingormissingpageswillbereplaced.

E-3

Table of Contents

Meaning of the Terms Used in this Manual

• Mainunit(orset):Thisreferstothecopyboard.

• USBmemory: referstoUSBflashmemory.

• USBmemorystorage: meansthesavingofsheetsurfacedatausingMEMORY(i.e.,theUSBport)oftheoperationpanel.

• Memoryforcomputerstorage: indicatesatemporarysavinglocationoftheimagethathasbeenread.

• “copy”: Both“print”and“USBmemorysaving”meanto“copy.”

• “Sheetsurface”: refertothedrawingportion.

• “Scroll”or“move”: indicatesfeedingofthesheet

• Memoryfornetworkstorage:Memoryusedfornetworkstorage.

• Network: The communications network on which devices are interconnected in net fashion for communication (exchange of

data)betweenthedevices.Forthiscopyboard,the“network”indicatestheLANbelow.

• LAN(LocalAreaNetwork):Aclosedcommunicationsnetworkforcommunicatingwithinarestrictedarea,suchaswithinacom-

pany.

• FTP(FileTransferProtocol):Theprotocol(communicationsrules)usedwhentransferringfilesonaTCP/IPnetwork.

Introduction ...............................................................E-2

Package Contents ......................................................E-4

Names of the Parts ....................................................E-5

Front ...................................................................... E-5

Input/output terminals .............................................E-6

Changing the Height of the Unit................................ E-7

Control Panel (Model N-20S/N-20W) ........................E-8

Control Panel (Model N-204) ...................................E-9

Functions of the Copyboard ....................................E-10

Basic Functions..................................................... E-10

Network Functions ................................................ E-10

Functions Specific to Model N-204 ........................E-10

Operation Steps .......................................................E-11

Setting the Time .......................................................E-12

Description of Operations ......................................E-12

Printing (printer sold separately) ............................E-14

Preparing the Printer ............................................. E-14

Basic Printing Operation ........................................ E-15

Moving the sheet surface manually ........................ E-17

Printing Thumbnails (Model N-204) ........................ E-17

Consecutive Printing (Model N-204) ....................... E-18

Using USB Memory ..................................................E-19

USB Memory Storage Procedure ............................ E-19

Saving Image Files on a Computer/Deleting Image

Files ..................................................................... E-21

Using the copyboard connected to a computer .....E-23

Using the Copyboard Connected to a Network .......E-25

Saving scanned images on the copyboard or FTP

server................................................................... E-25

Transferring image files to/deleting them from the

computer .............................................................. E-27

When the folder for saving is set to “Board” ...... E-27

Deleting image files from the copyboard ........... E-29

When the folder for saving is set to “FTP

Server” ...........................................................E-30

Deleting image files on the FTP server .............. E-31

CB Setup and Network Setting Procedure ..............E-32

CB Setup (operating the copyboard’s buttons) ......... E-32

Basic setting operation .................................... E-32

Table of Function Numbers and Settings ........... E-33

Simple Network Settings (via USB).......................... E-35

Making Detailed Settings (via LAN) ......................... E-37

Basic Setting Operations .................................. E-37

CB Setup ........................................................ E-40

Header/Footer ................................................. E-41

Network Setting .............................................. E-42

User Setting .................................................... E-43

Security Setting ............................................... E-44

Disk management Setting ................................ E-45

CB Information ................................................ E-45

Resetting the Network Settings ........................ E-46

Creating and Registering Headers and Footers .. E-47

Meaning of Error Messages ....................................E-48

Troubleshooting .......................................................E-50

Specifications ..........................................................E-52

Appendix ..................................................................E-53

Connections and Wiring Diagram ........................... E-53

E-4

Main unit [1]

Printer* [1]

Pleaseseetheinstructionmanualoftheprinterforinforma-

tionabouttheprinteraccessories.

* Depending on the type of product you have purchased,

theprintermaybesoldseparately.

Stand [1]

Amobilestand(withcasters)forsupportingthemainunit.A

printertableandACadapterboxareincluded.Forthecon-

tents of the stand’s package and instructions on assembly,

see the stand’s instructions or the separate Assembly and

SetupManual.

Pen tray [1]

Pen tray fixing screws (M4 × 20) (temporarily fastened on

mainunit)

N-20S/N-204:3screws,N-20W:4screws

(SeetheAssembly and Setup Manualforassemblyinstruc-

tions.)

Wall mount printer table [1 set]

Bracketfixingscrews(M4×8):4

ACpoweradapterbox:1

Velcro:2sets

* Soldseparately.

Wall brackets [1 set]

These are brackets for mounting the main unit on a wall.

(SeetheAssemblyandSetupManual.)

Upperwallbrackets:2

Lowerwallbrackets:2

Mainunitfixingscrews(M4×12:2)

* Soldseparatelyforsomeproducts.

Dedicated eraser [1]

Usethistoerasethedrawing.

Copyboard Accessories

Dedicated markers

(Oneeachofblack,red,blue,andgreen)

Usethesemarkerstodrawonthesheet

surface.

AC power adapter (with power cord) [1]

Thisisthe power adapterforsupplyingpowertothecopy-

board(SeePageE-53).

(LTE36E-S2-3)

USB cable (type B ↔ type A) [1]

[PLUScode715258900]

Documents

CD-ROM [1]

IncludestheUser’sManual(thismanual)inPDFformat.

TheUser’s Manualcontainsinstructionsonusingthecopy-

board.

Important Safety Information [1]

Includes instructions to be heeded in order to use the set

safely.

Assembly and Setup Manual

Includes instructions on installing the set and connecting it

withtheprinter(soldseparately).

Cableforconnectingthemainunittoa

computer.

Usedformakingthedevicesettings.

Notice

• Do not use this cable for connection to the printer

(soldseparately).

Notice

• Theincluded AC poweradapter and ACpower cord

areexclusively for usewiththisunit.Never use them

withotherproducts.

The package contents are as described below. Please check before use.

Package Contents

E-5

Names of the Parts

Frame cover

Sheet

Dedicatedmarkersareusedonthesheettodraw

diagramsandtowrite.

Control panel (See Page E-8, E-9)

Input/output terminals (see next

page)

*Locatedonthebottomsurface.

Printer table

The printer* is placed here.  (See the Assembly

andSetupManual.)

*Theprinterissoldseparately.

AC adapter box

Store the AC power adapters of the copyboard

and printer here. (See the Assembly and Setup

Manual.)

Stand

This stand supports the copyboard.  (See the

AssemblyandSetupManual.)

Main unit

Pen tray

* Dependingontheproductyouhavepurchased,theprintermaybe

soldseparately.

* Thisillustrationdoesnotshowtheconnectioncords.

Effective Reading Size

Theareathatcanbecopiedisthegrayareaofthediagram.

Note

• Itmightnotbepossibletoprintorcopywhenstoring

to USB memory or personal computer any portions

thataredrawnoutsideofthisrange.

approx.5mm

approx.10mm

approx.5mm

Effective reading size

Front

E-6

LAN terminal (RJ-45)

Connect to a LAN port on the network (switching

hub,etc.)usingacommerciallyavailableLANcable.

USB memory port (type A)

Insert a commercially available USB

memory device here. Scanned images

canbesaved.(SeepageE-19)

DC input connector

ConnectthiswiththeDCplugendoftheACpower

adapter.(SeePageE-53.)(Onlyconnectthesupplied

ACpoweradapter;nothingelse.)

Printer connector (USB port Type A)

Connect this with the USB connector of the printer

(SeePageE-53).

(The printer connector is dedicated for use with a

printer;useitonlywithaprinter.)

* This illustration does not show the printer or

connectioncords.

Personal computer (PC) dedicated USB

port (Type B)

ConnectthiswiththeUSBport(typeA)ofthePC.

Used to connect the copyboard to a computer to

make the copyboard’s device settings. Can also be

used to copy scanned images onto the computer.

(SeepageE-23,E-35.)

Theconnectorislocatedonthebottomsur-

faceofthemainunit.

Thediagramviewisseenfromthebottom.

Names of the Parts

Unlock

Lock

Caster

Locking/unlocking the stand’s casters

Afterinstallation, lock the casterswith the stoppers. When

movingthestand,unlockthecaster’sstoppers.

Thestoppersarelockedwhenthebottomispressed.Press

thetoptounlockthem.

Input/output terminals

E-7

Names of the Parts

(1) Unplug the power cord from the wall power outlet, then disconnect all the connection cords from

the main unit.

(2) Remove the locking knobs (one on each side).

(3) Change the position of the main unit support pieces.

Lift the main unit about 1 cm to unhook it.

Insert the stand’s hooks securely into in the mounting holes in the main unit’s support pieces (one on

each side).

(4) Fasten the two locking knobs (left and right) to the mount support pieces.

(5) Connect all the connection cables.

Changing the Height of the Unit

This is the height adjustment when setting up the copyboard on the optional stand. The stand height can

be adjusted to 3 levels by 100 mm.

* Thisillustrationdoesnotshowtheconnectioncords.

Mountinghole

Hook

lock-screw

Rearframes

lock-screws

Stand

CAUTION

• Atleasttwopersonsshouldholdthemainunit.Ifnot,themainunitcoulddroportip,resultinginaccidentalinjury.

• Lockthestand’scastersbypressingthebottomofthecasterlockbutton.Ifnot,thestandcouldmovewhilethemain

unitisbeingmountedorremoved,resultinginaccidentalinjury.

• Afterunpluggingthepowercordfromthewallpoweroutlet,disconnectalltheconnectioncordsfromtheset’sinput/

outputterminals.Ifthesetisremovedwithoutdisconnectingthecords,itcouldtip,resultinginaccidentalinjury.

• Ifaprinterismountedontheset,removetheprinterbeforestarting.Ifnot,thestandcouldtipwhilethemainunitis

beingmountedorremoved,resultinginaccidentalinjuryduetotheprinterdroppingortippingover.

E-8

6 Save ( ) button (USB memory storage)

Thesheetismovedby1screenandread,andtheimage

isstoredontheUSBmemorydevice.

WhenconnectedtoacomputerbyUSBcable,theimage

isstoredinthecopyboard’sinternalmemory.

7 Network ( ) button

Scrollsandscansthesheetonescreen’sworthandsaves

thedatainthefolderforsaving.

Thedataissavedeitheronthecopyboardorinafolder

ontheFTPserver,aspreviouslyset.

8 Scroll/Stop ( ) button

Scrollsthesheetonescreenportionleft,thenstopsauto-

matically. A press of this button while scrolling will stop

thescrolling.

9 USB A Memory port (USB Type A)

Saves in commercially-available USB memory images

thathavebeenreadbythecopyboard.

10 Status

These indicators notify of errors in the copyboard, USB

memorydevice,networkorprinteraccordingtowhether

they are lit or off and how they light (see table below).

When the copyboard is functioning properly, the status

indicatorsarelitgreen.(Seetablebelow)

Alsochecktheerrormessageonthedisplaywindow.

Forerrorinformationandremedies,seepageE-48.

Display

window Meaning USB indicator Printer indicator

Printer problem

Off Lit red

An unsupported printer is connected

USB Memory not recognized

Lit red Off

USB Memory storage problem

USB memory not connected

Memory is full

Warning that disconnection of USB

memory has been forgotten

Reading error

Flashing red Flashing redSystem error

Time setting error

Security protection

Off Off

Color printed prohibited

LAN cable disconnected

FTP server recognition error

FTP server connection failure

FTP server writing failure

Network or other error

Network setting reset error

Header/footer writing error

*Theletters“USB”scrollonthedisplay.

1 ON/Standby ( ) button

Turnsthecopyboard’spoweronandoff(standbymode).

2 Display window

The number of copies, operating status and error mes-

sagesaredisplayedonthe7-segmentLEDs.

3 Number of Copies ( )/Test print button

Press this button to set the number of copies to be

printed(max.10). Thenumberofcopiesis displayedon

thedisplaywindow.

* “ ”isdisplayedduringtestprinting.

4 Color Print ( ) button

Thesheetismovedby1screenandread,andtheimage

is printed in color in the number of copies indicated on

thedisplaywindow.

5 B/W Print ( ) button

Thesheetismovedby1screenandread,andtheimage

isprintedinblackandwhiteinthenumberofcopiesindi-

catedonthedisplaywindow.

Control Panel (Model N-20S/N-20W)

When pressing a button, please press the center area

(the square bulge). The button may not work if it is

pressed on a corner.

Names of the Parts

E-9

6 Save ( ) button (USB memory storage)

Thesheetismovedby1screenandread,andtheimage

isstoredontheUSBmemorydevice.

WhenconnectedtoacomputerbyUSBcable,theimage

isstoredinthecopyboard’sinternalmemory.

7 Network ( ) button

Scrollsandscansthesheetonescreen’sworthandsaves

thedatainthefolderforsaving.

Thedataissavedeitheronthecopyboardorinafolder

ontheFTPserver,aspreviouslyset.

8 Scroll/Stop ( ) button

When the  button is pressed, the sheet scrolls one

screen’s worth tothe left (tothe next screen)andstops

automatically.

When the  button is pressed, the sheet scrolls one

screen’s worth to the right (to the previous screen) and

stopsautomatically.

Whenpressedduringscrolling,scrollingstops.

9 Continue ( ) button

Used to select the number of screens when printing or

storingmultiplescreensconsecutively.

10 Consecutive printing number indicators

These light yellow to indicate the number of screens

selectedwiththeconsecutivebutton.

11 Thumbnail ( ) button

Usedtoselect the layout for printingthumbnailsof mul-

tiplescreensonasinglepage.

The selected layout is indicated on the display window.

(PageE-17,“PrintingThumbnails”)

12 USB A Memory port (USB Type A)

Saves in commercially-available USB memory images

thathavebeenreadbythecopyboard.

13 Status

These indicators notify of errors in the copyboard, USB

memorydevice,networkorprinteraccordingtowhether

theyarelitoroffandhowtheylight(seepreviouspage).

When the copyboard is functioning properly, the status

indicatorsarelitgreen.(Seepreviouspage)

Alsochecktheerrormessageonthedisplaywindow.

Forerrorinformationandremedies,seepageE-48.

1 ON/Standby ( ) button

Turnsthecopyboard’spoweronandoff(standbymode).

2 Display window

The number of copies, operating status and error mes-

sagesaredisplayedonthe7-segmentLEDs.

3 Number of Copies ( )/Test print button

Press this button to set the number of copies to be

printed(max.10). Thenumberofcopiesis displayedon

thedisplaywindow.

* “ ”isdisplayedduringtestprinting.

4 Color Print ( ) button

Thesheetismovedby1screenandread,andtheimage

is printed in color in the number of copies indicated on

thedisplaywindow.

5 B/W Print ( ) button

Thesheetismovedby1screenandread,andtheimage

isprintedinblackandwhiteinthenumberofcopiesindi-

catedonthedisplaywindow.

Control Panel (Model N-204)

When pressing a button, please press the center area

(the square bulge). The button may not work if it is

pressed on a corner.

Names of the Parts

E-10

Functions of the Copyboard

Printingofthumbnailsonsinglepage Consecutiveprintingorstoring,onescreenatatime

LAN

Viewing

ofimages

storedonthe

copyboard

Copyboard’s

memory

Viewingof

imagesstored

onFTPserver

Outputtopaper

Storingon

USBmemory

device

Storingofimageoncomputer

Basic Functions

① Printing ② Storing on USB memory

devices

③ Capturing images on a com-

puter

Network Functions

④ Viewing images stored on the copyboard

via a network

⑤ Viewing images stored on an FTP server via

a network

Functions Specific to Model N-204

⑥ Printing thumbnails of multiple screens on

a single page

⑦ Printing or storing multiple screens con-

secutively

E-11

Draw on the Sheet Surface

Please draw with the dedicated markers that have been

supplied.

Ifanythingotherthanthededicatedmarkersoreraserare

used,itmaybeimpossibletoerasethesheetorthesheet

couldgetdirty.

Tomovethesheetmanually,see“Movingthesheetsurface

manually”onpageE-17.

Printing

(1) SetA4orlettersizepaper.

 Do not set anything other

thanA4orlettersizepaper.

(2) Press the ON/Standby 

buttonofthecopyboardandswitchonthepower.

(3) Switchontheprinterpower.

 For instructions on operating the printer, see the

printer’soperatinginstructions.

(4) PresstheColor Print or the B/W Print button.

The copyboard will move a one-screen portion of

sheet,readtheimage,andstartthecopyoperation*.

See“Printing”onPageE-14.

Saving to USB Memory

(1) Press the ON/Standby  button

of the copyboard to switch on the

power.

(2) InsertUSBmemoryintotheMemory port(USBA

port)ofthecopyboard.

(3) PresstheSave button.

 See“UsingUSBMemory”onPageE-19.

Saving on a computer

(1) Pressthecopyboard’sON/Standby( )buttontoturn

thepoweron.

(2) ConnectthecopyboardtothecomputerusingthePC

dedicatedUSBport.

(3) PresstheSave( )button.

(4) Theimageissavedonthecomputer.

Using a network (via LAN)

(1) CheckthatthecopyboardisconnectedtoaLANport

onthenetwork.

(2) Pressthecopyboard’sON/Standby buttontoturn

onthepower.

(3) PresstheNetwork button.

See“UsingtheCopyboardConnectedtoaNetwork”

onpageE-25.

Operation Steps

The copyboard uses an image scanner to scan characters or diagrams drawn using special markers (four col-

ors). When the Color Print or B/W Print button is pressed, the image on the screen is printed out to the

printer. When a USB memory device or computer is connected, the image on the screen is saved as image data

when the Save button is pressed. (For the memory for computer storage, one sheet’s worth of data is

saved, overwriting previously saved data.)

Furthermore, when network settings are made, image files can be saved on the copyboard or FTP server.

Preparation

• Setupthenewlypurchasedcopyboardandconnectaprinter.

Seeaseparatemanualtitled“AssemblyandSetupManual.”

• PlugtheACpowerplugsofthecopyboardandprinterintowallpoweroutlets.

• Afterpurchase,besuretosetthecopyboard’sclock.Ifnot,theproperdateandtimewillnotbedisplayedonprints

or in image files. See page E-12.

When Not Using the Copyboard

(1) Byallmeans,cleanlyerasethedrawingfromthesheetsurfacewiththededicatederaser.(Leavingthedrawingforalong

periodwillmakeithardertoerase.)

(2) PresstheON/Standby buttonofthecopyboardandswitchoffthepower(standbymode).

 ThepowercannotbeswitchedoffwhiletheUSBmemoryremainsinstalled.(Thisisapreventionfunctionagainstforget-

tingtounplugtheUSBmemory.)

(3) Switchofftheprinterpower.

Note

• Whenturningonthepower,waitabout5secondsormoreafterthepowerplughasbeenconnectedbeforepressingthe

ON/Standby button.

• ThecoloroftheimageswhenprintedincolororwhensavedinUSBmemorywilldiffersomewhatfromthemarkercolors.

• Blurredcharacters,thinlines,overlappingofmarkersand other factorscancausecolorstodifferinplacesandcanalso

resultinportionsthatcannotbescannedsuccessfully.

• ThedatainthememoryforcomputerstorageisdeletedwhentheON/Standby buttonisturnedoff(standbymode)or

theconnectionwiththecomputeriscut.Thedatainthememoryfornetworkstorageisnotdeleted.

E-12

Setting the Time

The date and time are stamped on the printing paper and recorded in the file information when files are stored

on the copyboard and FTP server, so set the copyboard’s time correctly.

The time can also be set from a computer via a network (when connected to a LAN). (See page E-40.)

Press the ON/Standby button to turn on the power.

Thedisplaywindow’sLEDslightandthepowerturnson.

Press the Number of Copies button while

pressing the ON/Standby button, then release

the ON/Standby button.

Themodeswitchesto“CBSetup”,and“F1”isdisplayedonthe

displaywindow’sLEDs.

The mode returns to the normal mode if no buttons are oper-

atedfor10seconds.

Description of Operations

1 Switch to “CB Setup”.

With the power turned on, press the Number of Copies 

buttonwhilepressingtheON/Standby button,thenrelease

theON/Standby button.

2 Press the Save button and switch to “Time Setting”.

ThemodeswitcheseachtimetheSavebuttonispressed.

Contentsofsettingmodedisplayedondisplaywindow

(First2digits) (Last2digits)

Christianyear Month Day Hours Minutes

3 Set the setting mode’s date and time.

WhentheColorPrint orB/WPrint buttonispressedonce,thesettingcan

bemade.

UsetheColorPrint (Increase)andB/WPrint (Decrease)buttonstoset.

4 Press the Save button to enter the setting.

Thecopyboardswitchestothenextsettingposition.

Repeatsteps4and5tosetthecurrentdateandtime.

• Ifthe ON/Standby button ispressedduring steps 3 to5, the partiallymade

settingiscanceledandthedateandtimereturntothevaluessetbeforetheset-

tingwasstarted.

5 Complete the setting.

WhentheSave buttonispressedaftertheminute’ssettingposition(c.6display)

hasbeenset,the“TimeSetting”iscompletedandthe[F1]display(CBSetup)reap-

pears.PresstheON/Standby buttontoreturntothenormalmode.

Normalmode

“CBSetup”mode

Preparations :

Connectthepowerplugtoawallpoweroutlet(AC100–240V).

[Example]: Setting the date and time to 2:16 pm October 8, 2011

E-13

Setting the Time

Use the Color Print (Increase) and B/W Print

(Decrease) buttons to select “14” (the hours), then

press the Save button to enter.

Thedisplayswitchesto“c6”(settingofminutes).

Use the Color Print (Increase) and B/W Print

(Decrease) buttons to select “08” (the day), then

press the Save button to enter.

Thedisplayswitchesto“c5”(settingofhours).

Use the Color Print (Increase) and B/W Print

(Decrease) buttons to select “16” (the minutes),

then press the Save button to enter.

Thedisplayswitchesto“F1”(functionsetting).

Press the ON/Standby button to return to the

normal mode.

• Thecopyboardalsoreturnstothenormalmodeifyoujustwait

10seconds.

This completes the time setting.

Use the Color Print (Increase) and B/W Print

(Decrease) buttons to select “10” (the month),

then press the Save button to enter.

Thedisplayswitchesto“c4”(settingofday).

Use the Color Print (Increase) and B/W Print

(Decrease) buttons to select “11” (the last 2

digits of the year), then press the Save button

to enter.

Thedisplayswitchesto“c3”(settingofmonth).

Press the Save button to move to the last dig-

its of the year

Thedisplayswitchesto“c2”(last2digitsofyear).

Notice:

Thefirst two digits of the year (“20”) are fixed. Simplypressthe

Save  button to switch to the last 2 digits of the year setting

position.

While “F1” is displayed, press the Save button

to enter.

Thedisplayswitchesto“c1”(first2digitsofyear).

Ifnobuttonsareoperatedfor10secondswhileinthetimesetting

mode,themodereturnstothe“CBSetup”mode.

“CBSetup”mode Normalmode

E-14

Use a printer to print out the image that has been drawn on the sheet surface. Use a PLUS-designated printer.

Operations and names of parts differ from printer to printer. For details of operations, see your printer’s operat-

ing instructions.

Preparing the Printer

Pleasecheckthatthecopyboardandtheprinterhavebeenconnected.SeePageE-53.

Printing (printer sold separately)

Set the paper.

PleaseuseA4orlettersizeprinterpaper.

• Whenusinglettersizepaper,setlettersizepaperinthe

devicesettings.(SeepageE-33,E-40.)

1)Arrangethepaperedgessothattheyareeven.

2)Insertpaperatthespecifiedpositionofthepapertray.

3)Pressthepaperguidegentlyuntilittouchesthepaper.

Note

Seeyourprinter’soperatinginstructionsforadescrip-

tionofthepaperthatcanbeused.

Notice

• Depending on the printer’s specifications, some

timemayberequiredforcleaningoftheprinthead.

Switch on the power.

Pressthepowerswitch.Thepowerindicatorlights.

This completes the preparation of the printer.

PresstheColorPrint ortheB/WPrint buttononthecopyboard’scontrolpanel.Onepageworthofdataisreadand

theprintingoperationstarts.

Notice

• Dependingontheprinter,indicators,etc.,mayflashafterthepoweristurneduntiltheprinterispreparedtoprint.

Inthiscase,seetheprinter’soperatinginstructionsandcheckthattheprinterisreadybeforestartingtheprinting

operationonthecopyboard.



When finished printing...

Switchofftheprinterpowerandremovethepaper.

Closethepapertray.

Notice

• Caution:DonotturnoffthepowerordisconnecttheUSBcableduringprinting.

Dischargetray

Paperguide

Paper

Powerswitch

Appearanceofprinterisforillustrationpurposes.

Papertray

E-15

Preparetheprinter.(Seethepreviouspage.)

Note

• When turning on the power, wait about 5 seconds or more after the

power plug has been connected before pressing the ON/Standby 

button.

• PresstheON/Standby buttontoswitchonthepower.TheLEDofthe

displaywindowwilllight.

• Turnonthecopyboard’spowerbeforeturningontheprinter’spower.

Press the ON/Standby button and switch on the power.

Press the Scroll/Stop button and display the sheet sur-

face you want to print.

ApressoftheScroll/Stop buttonscrollsthesheetsurfaceonescreenpor-

tionleftandautomaticallystopsit.

Tostoptheoperationpartwaythrough,presstheScrol/Stop buttonagain.

When the Scroll/Stop  button is pressed, the sheet surface scrolls one

screen’sworthtotheleft(tothenextscreen)andstopsautomatically.

When the Scroll/Stop  button is pressed, the sheet surface scrolls one

screen’sworthtotheright(tothepreviousscreen)andstopsautomatically.

Tostopduringscrolling,presstheScroll/Stop or buttonagain.

Note

• To display the next screen, press the Scroll/Stop button after scrolling

stops. If the button is pressed during scrolling, scrolling stops immedi-

ately.Whenpressedagain,thesheetisscrolledonescreen’sworthfrom

thepointatwhichitstopped.

• Theone-screenthatisvisibleisprintableposition.

• To fine-adjust thesheetsurfaceposition,withthe sheet stopped, move

thesheetslowlybyhand.Thesheetcanbemovedeithertotheleftorto

theright.

• Printing of the portion located around the sheet surface might not be

possible.Pleasesee“Effectivereadingsize”onPageE-5.

Basic Printing Operation

Preparation:

Preparation:CheckthattheACpowerplugsofthecopyboardandprinterareconnected

towallpoweroutlets.

Printing

For models N-20S and N-20W

Therearetwoscreens.

For model N-204

Therearefourscreens.

Model name: N-20S/N-20W

Model name: N-204

continued on next page

E-16

Printing

Press the Color Print or the B/W Print button to print.

Press the Number of Copies button and select the number of copies.

Note

• “01”isselectedwhenthepoweristurnedon.

• Upto10copiescanbespecifiedanddisplayedonthedisplaywindow.

• Thenumberofcopiesincreasesby1eachtimetheNumberofCopiesbuttonispressed,and“ ”isdisplayed

after“10”(thisisusedfortestprinting:seepageE-51).Whenthebuttonispressedagain,thedisplayswitchesto

“01”.Thenumberswitchescontinuouslyifthebuttonisheldin.

• Aftersettingthenumberofcopies,proceedtostep4within1minute.Thenumberofcopiesisresetto“01”ifno

operationisperformedwithin1minute.

• Thereadingoperationisperformedforaone-sheetportion(whilethesheetisscrolled)andtheprintingoperationis

performed.

Cancellation of the print operation in progress

WhentheON/Standby buttonispressed,thereadingofthesheetstops,andthepartiallyreadimagedataisprinted.

Waituntilthesheetisexpelledfromtheprinter.

Note

• IftheON/Standby buttonispressedwhilethesheetsurfaceisbeingread,printingisinterruptedandonlypart

oftheimagewillbeprinted.

• Theone-screenportionisreducedtoA4papersizeandprinted.

 Forwide type copyboards(modelN-20W),the image iscompressedabout 75% in the horizontal direction. To

printwiththesameproportionsastheimageonthesheetsurface,see“MakingtheDeviceSettings”(pageE-33).

• Aflashing“ ”inthedisplaywindowindicatesaprinterror.See“MeaningofErrorMessages”onPageE-48.

• Whenprinting,atimestamp(dateandtime)isprintedatthetoprightofthesheet.See“CBSetup”onpageE-32,

E-40.

• Switchofftheprinterpower.

Note

• WhentheEraseReminderfunctionissetto“Enable”

 WhentheON/Standby buttonispressed,thedisplaywindowandalltheindicatorsflashsimul-

taneously,thesheetautomaticallymovestothesurfacethatisnotyeterasedandthepowerturns

off.TosettheEraseReminderfunctionto“Disable”,seepageE-34,E-40.

 *TheEraseReminderfunctionmaynotworkproperlyduetodirtonthesheet'sadhesivesections

ormarkerresidue.

• Ifnobuttonisoperatedwithin30minutes,thepowerturnsoffautomatically(autopoweroff).

 Whenthepoweristurnedoff,scannedimagesstoredintheunit’sinternalmemoryarecleared.

• TheautopowerofffunctioniscanceledwhenthecopyboardandcomputerareconnectedbyUSBcable.

When the copyboard is not going to be used, press the ON/Standby button and switch

off the power (standby mode).

E-17

Moving the sheet surface manually

Thesheetcanbemovedevenwhenthepowerofthecopyboardisswitchedoff.

Thesheet canbemovedwithyourhandeither inleftorright.Pleaseplaceyour

handattheverticalcenterandmovethesheetslowly.

Notice

• Quickmovementcancausedamagetothedrivemechanismofthecopy-

board.

• Whenthesheetsurfaceismoved,rollertracesmayappearonpartsofthe

screen.

Note

• WhentheEraseReminderfunctionissetto“Enable”,theEraseReminder

functionmaynotoperateproperlyifthesheetsurfaceismovedbyhand.

Printing

Printing Thumbnails (Model N-204)

Multiplescreensfromthescreenatthecurrentpositioncanbeprintedonasinglepage.

• Thethumbnailprintingfunctionisforprintingonly.StoringwiththeSave orNetwork buttonisnotpossible.

1. Press the Thumbnail button and select the page layout.

Display window status and page layout

Thumbnail

selection

Movementofdisplaywin-

dowLEDs

Pagelayout

Thumbnailsof2

screens

Thumbnails

of4screens

(arrangedhori-

zontally)

Thumbnails

of4screens

(arrangedverti-

cally)

Cancel(1

screen) Cancel

(1)

Whenprintingisfinished,thumbnailprintingiscanceled.

Note

• Toprintthumbnailsof3screens,specifythumbnailsof4screens(arrangedhorizontallyorvertically).

• Ifthereisablankscreeninthespecifiedsequence,thatscreenisprintedasablank.

• If the ON/Standby button is pressed during scanning, scanning is interrupted and only the images that have been

scannedareprintedasthumbnails.

2. Press Color Print or B/W Print button to print.

Whenoneoftheprintbuttonsispressed,thespecifiednumberofscreensiscollectedsequentiallyinthescanningmemory

andthumbnailprocessingisperformed.Printingstartsafterthisprocessingiscompleted.

Themode switches inthe following ordereachtimethe

buttonispressed.

Thumbnails of 2 screens → Thumbnails of 4 screens

(horizontally) → Thumbnails of 4 screens (vertically) →

Cancel...

• Thethumbnailsarearrangedinorderfromthecurrently

visiblescreen,countedtotherightasscreen1,screen

2,screen3andscreen4.

 Tostartfromaparticularscreen,presstheScroll/Stop

or buttontoscrolltothatscreen.

Notice

• Note that if you have drawn on the sheet after

moving it manually part way or after stopping

scrolling in the middle, the amount of movement

foronescreen’sworthchanges,sothepositionof

thescannedimageswillbesubstantiallyoff.

• Thisproductusesanendlesssheet.Notethatthe

positionofthescannedimagesmaygoslightlyoff

duetostretchingofthesheetorslippage.

E-18

Printing

Consecutive Printing (Model N-204)

Multiplescreensfromthescreenatthecurrentpositioncanbeprinted(orstored).

1. Press the Continue button and select the number of screens.

Themodeswitchesinthefollowingordereachtimethebuttonispressed.

Screens1and2→Screens1to3→Screens1to4→Cancel...

Thenumberofconsecutivescreensisindicatedbythenumberofconsecutiveprintingnumberindicatorsthatarelityellow.

(“CP”isdisplayedonthedisplaywindowwhenconsecutiveprintingisselected.)

* Thescreensarecountedinorderfromthecurrentlyvisiblescreenasscreen1,screen2,screen3andscreen4.Tostart

fromaparticularscreen,presstheScroll/Stop or buttontoscrolltothatscreen.

Notice

• Notethatifyouhavedrawnonthesheetaftermovingitmanuallypartwayorafterstoppingscrollinginthemiddle,the

amountofmovementforonescreen’sworthchanges,sothepositionofthescannedimageswillbesubstantiallyoff.

• Thisproductusesanendlesssheet.Notethatthepositionofthescannedimagesmaygoslightlyoffduetostretching

ofthesheetorslippage.

Consecutive printing number indicators

Onelit:Cancel(single-screenprinting/storing)

Twolit:Screens1and2printed/storedconsecutively

Threelit:Screens1to3printed/storedconsecutively

Fourlit:Screens1to4printed/storedconsecutively

Whenprintingisfinished,consecutiveprintingiscanceled.

Note

• Ifthereisablankscreeninthespecifiedsequence,thatscreenisprintedasablank.

• If the ON/Standby button is pressed during scanning, scanning is interrupted and only the images that have been

scannedareprinted.

• Ifprintingofmultiplecopieshasbeenspecified(withtheNumberofCopiesbutton),afterscanning,thespecifiednum-

berofcopiesisprinted,andthisisrepeateduntilthespecifiednumberofscreenshasbeenscannedandprinted.

2. Press Color Print or B/W Print button to print.

When one of the print buttons is pressed, the screens are scanned and printed repeatedly until the specified number of

screenshasbeenscannedandprinted.

E-19

Using USB Memory

The content of what has been drawn on the sheet surface of the copyboard can be saved in USB memory.

Later, the saved image can be read into a personal computer and made into a document of the proceedings of

the meeting, or affixed to a document.

Notice

• NoUSBflashmemorydeviceisincluded.WhenpurchasingaUSBflashmemorydevice,payattentiontothefollowing:

1.USBflashmemorydevicesformattedinFAT16/FAT32aresupported.USBflashmemorydevicesinNTFSformatcannot

beused.

2.USBflashmemorydevicesprotectedbyasecurityfunctioncannotbeused.

3.USBflashmemorydeviceswithacapacityofover32GBcannotbeused.

4.IftheUSBflashmemorydeviceisdividedintomultiplepartitions,onlyonepartitioncanberecognizedwiththisunit.

USB Memory Storage Procedure

Preparation:

Checkthatthecopyboard’sACpowerplugisconnectedtoawallpoweroutlet.

Press the ON/Standby button and switch on the power.

Note

• Whenturningonthepower,waitabout5secondsormoreafterthepower

plughasbeenconnectedbeforepressingtheON/Standbybutton.

• PresstheON/Standby buttontoswitchonthepower.TheLEDofthe

displaywindowwilllight.

Insert the USB memory device into the USB A Memory

port of the copyboard.

Notice

• Checktheside(polarity)oftheUSBmem-

ory device before inserting it. Forcing it

in the reverse orientation will damage the

USB A Memory port or USB memory

device.

• Be careful not to bump into the USB

memory device with hand or body while

itismounted.Doingsocoulddamagethe

USB memory device or USB A Memory

port.

Theprocedurefordisplayingthesheetsurfaceyouwanttostoreisthesameas

forprinting.

See“BasicPrintingOperation”onpageE-15.

Note

• TheonescreenportionthatisviewablewillbesavedinUSBmemory.

• Savingoftheportionlocatedaroundthesheetsurfacemightnotbepos-

sible.Pleasesee“Effectivereadingsize”onPageE-5.

Press the Scroll/Stop button (for model N-204, the Scroll/

Stop or button) to display the screen to be stored.

Model name: N-20S/N-20W

Model name: N-204

Model name:

N-20S/N-20W

Model name:

N-204

continued on next page

E-20

Using USB Memory

Removing the USB memory

Checkthattheflashingrotationofthedisplaywindowhaschangedtosteady

lightingandthattheUSBmemoryaccessindicatorisnotflashing,thenpullthe

USBmemorystraightout.(PleaseseeyourUSBmemorymanualfordetails.)

Notice

• DonotunplugtheUSBmemorydeviceduringtheUSBmemorystorage

operation (i.e., during the rotating, flashing display in the display win-

dow),orwhiletheaccessindicatoroftheUSBmemorydeviceisflashing

becausedatawillbedestroyed.

When the copyboard is not going to be used, press the ON/Standby button and switch

off the power (standby mode).

Note

• “ ”lettersappearingatone-secondintervalsinamovingdisplayinthedisplaywindowindicatethataUSB

memorydeviceismounted.UnpluggingtheUSBmemorydevicewillswitchoffthepower.(Afunctionthatserves

asaremindertounplugtheUSBmemorydevice)

• WhenthecopyboardandacomputerareconnectedbyUSBcable,theautopowerofffunction(whichturnsthe

poweroffautomatically)iscanceled.

• ScannedimagefilesstoredinthememoryforcomputerstoragearedeletedwhentheON/Standby buttonis

turnedoff.Filesinthememoryfornetworkstoragearenotdeleted.

Flashingindicator“rotates”sequentiallyduringUSBmemory

storageoperation.

Displaywindow

Press the Save button to store.

• Thereadingoperationisperformedforaone-sheetportion(whilethesheetisscrolled)andUSBmemorystoragestarts

afterthescrollingcompletes.

• FormodelN-204,multiplescreenscanbestoredconsecutively.(SeePageE-18,“ConsecutivePrinting”.)

The(5second)flashing“US”displayindicatesthattheUSBmemoryhasnotbeeninserted.Pleaseinsert

theUSBmemoryandthenpresstheSave button.

A (5 second) flashing “FL” display indicates that there is insufficient free capacity to permit storage in

USBmemory.ReplacewithaUSBmemorydevicehavingsufficientcapacity.

See“MeaningofErrorMessages”onPageE-48forothererrordisplays.

Note

• DependingontheUSBmemory,itmaytaketimeforrecognitionoritmaytaketimeforsaving.

• WhentheON/Standby buttonispressedduringthereadingoperation,thereadingoperationwillbediscontin-

uedandthepartiallyreadimagedatawillbestoredintheUSBmemory.

 Tomovethesheetsurface,stopscrolling,thenpresstheScroll/Stop button(formodelN-204,theScroll/Stop

or button).

• Thedateandtimeofthesavedfilewillreflectthecopyboardtimesetting.See“CBSetup”onPageE-33.

• WhenacertainamountoffreecapacityisnotavailableintheUSBmemory,“FL”willbedisplayedwhentheSave

buttonispressed.Deletedata,setthesheetsurfacebacktotheoriginalstatus,thenpresstheSave button

again.

• WhenthecopyboardandacomputerareconnectedbyUSBcable,thedataisstoredinthemainunit’sinternal

memory.

Page is loading ...

Plus N-204 User manual

Brand: Plus

Model: N-204

Type: User manual

This manual is also suitable for

Download PDF

report

Plus N-204 User manual

This manual is also suitable for

Plus N-204 User manual

Related papers

Other documents