•Fitting material: Aluminium.
•Lamp type: C372: 60 x 0.06W Integrated High lumen output LED.
C373: 90 x 0.06W Integrated High lumen output LED.
The light source of this luminaire is not replaceable. When the light source reaches its end of
life the whole luminaire should be replaced, or the light source should only be replaced by the
manufacturer.
•Voltage: 220V - 240V ~ 50Hz.
•Protection against electric shock: Class 2. Does not require earthing.
•IP Rating: IP 20. Dust Protected. Protected against solid foreign objects of 1.0mm Ø and greater.
Protected against splashing water.
•Commercial/domesticuse.
•Notsuitableforoutdooruse.
•Notforuseinareasexposedtomoisture.
•NonDimmable.
•Maximum Ambient temperature range: 20ºC - 40ºC.
•Dimensions: C372: (L)347mm x (W)35mm x (D)85mm
C373: (L)575mm x (W)35mm x (D)85mm
C372 / C373 - attachments:
Iftheexternalexiblecableorcordofthisluminaireisdamaged,itshouldbeexclusively
replacedbythemanufacturerorhisserviceagentorasimilarqualiedpersoninorderto
avoid a hazard. To ensure that you get maximum longevity and maximum use out of your
luminaire, please observe the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
mustbecarriedoutbyaqualiedelectrician,inaccordancewithSANS10142.Oncompletion
ofinstallation,ensurethattheCerticateofComplianceisupdated.
•Beforeconnectingthisluminaire,ensurethatvoltageindicatedontheratinglabelcorresponds
with the mains voltage in your home.
•Thisluminaireischeckedinfullforconformitytothequalitystandardsandsafetyrequirements.
•Themanufacturer/supplierisnotresponsibleforanydamageofpropertiesandpersons,
caused by the incorrect use or installation of the luminaire.
•Shouldyoubeunsureofhowtoinstallthisluminairecorrectly,pleaseconsultaprofessional
electrician or your supplier for assistance.
•Ensureallitems/components,threadsandscrewsaretightlysecured.
IMPORTANT:
•Tamperingwiththisluminaire,IE.Usingsiliconsealersorincorrectcabling,willinvalidateyour
warranty.
•Whentheprotectionglassisdamaged,itshouldbereplacedimmediately.Theluminairemust
not be used without the protection glass.
•Pleasecheckwhethertheconnectionofthepowercordissafeandreliablebeforeinstallation.
•Alwaysensurethatthemainssupplyvoltageiscorrect.
•Ensurethatyoudonotplacetheluminairenearanycombustiblematerialsand/orsurfaces.
•Chokinghazard:Maycontainsmallparts.Keepawayfromchildren.
•Donotinsertyourngersoranypartofyourbodyintotheelectricalcontactandsocketsofthis
product whilst it is connected to the electricity supply.
•Itemmayvaryslightlyfromthepictureonthecarton.
•Coastalhumiditymayeffectthelongevityoftheluminaire.
SPECIFICATIONSIMPORTANT SAFEGUARDS
•SeeFigure1-5.
•Switchthepowersupplyoffbeforecommencingwiththeinstallation.
•Whendrillingisrequiredforfixingtheluminairetotherequiredsurfacepleaseensurethatno
pipes or cables are within the drilling area.
•Reconnectpowersupply.
INSTALLATION
CLEANING
•Beforecleaningalwaysensurethepowersupplyisturnedoff.
•Donotimmersetheluminaireinwater.
•Noabrasiveproducts,solvents,detergentmaybeusedtocleanthisluminaire.
•Ensurethatthefittingdoesnotcomeincontactwithcorrosivechemicals,etc.
•Coastalareasensurethattheluminaireiscleanedfortnightly.