Axler GSU-1 Quick start guide

Brand: Axler

Model: GSU-1

Type: Quick start guide

UNIVERSAL

GIMBAL SUPPORT

GSU-1

SPECIFICATIONS

Accessory mount 1/4-20 threaded

sockets (×2)

Clamp range 1 to 2.4 in.

(26 to 60 mm)

Crossbar diameter 1 in. (25 mm)

Dimensions

(H×W×D)

7.1 × 18.1 × 14.8 in.

(18 × 46 × 37.7 cm)

Weight 2.4 lb. (1.1 kg)

• Please read and follow these instructions, and

keep this manual in a safe place.

• Keep this product away from children.

• Make sure everything is secure before

proceeding.

• Make sure this product is intact and that there

are no missing parts.

• To avoid damage to this product, be careful not

to overtighten or improperly thread any of the

threaded ﬁttings.

• Do not exceed the maximum load capacity.

• Be careful not to catch your ﬁngers in any of the

moving parts.

• All images are for illustrative purposes only.

PRECAUTIONS

THANK YOU FOR CHOOSING AXLER

The Axler GSU-1 is a dual-handle system designed

to work with most single-handle gimbals providing

increased stabilization. It distributes the weight

between your hands and over your shoulder to

reduce fatigue with the use of the body brace and

shoulder sling. Additionally, the support offers

mounting options for microphones, monitors, and

lights.

1. Grip handles (×2)

2. Handle locks (×2)

3. 1/4-20 sockets (×2)

4. Clamp

5. Crossbar

6. Shoulder-strap hooks

7. Clamp locks (×2)

8. Telescoping brace extension

9. Brace extension socket

10. Twist lock

11. Body brace

12. Removable waist strap

13. Shoulder strap

14. Clamp insert for DJI and Moza gimbal

handles

OVERVIEW

ATTACHING THE HANDLES

Loosen the grip's locking knob, slide the handle

onto the crossbar, and lock it in position.

You can pull the knob outward for ratchet

capability. (Fig. 1)

SECURING A GIMBAL

1. Loosen the clamp locks, alternating between

each one, until the clamp is fully open. (Fig. 2)

2. Insert your gimbal’s handle into the clamp. (Fig. 3)

If you are using a DJI or Moza gimbal, use the

included clamp insert. (Fig. 3a) Make sure the

insert's opening faces the clamp locks.

3. Tighten the locks, alternating between each

one, until the gimbal is secure in the clamp.

(Fig. 4) Do not overtighten.

Fig. 1

Fig. 2

Fig. 3a

Fig. 3

Fig. 4

CONNECTING THE BODY BRACE

1. Screw the telescoping extension into the

extension socket on the body of the clamp.

(Fig. 5)

2. Firmly press the body brace onto the end of the

extension until it snaps in place. (Fig. 6)

3. Rotate the twist-lock to loosen and pull out the

extension, then lock to secure. (Fig. 7)

ACCESSORY ATTACHMENT

The GSU-1 offers two 1/4-20 threaded

sockets in the front and a 25 mm diameter

crossbar. Use these to attach Axler articulating

arms or 25 mm clamps and connect accessories

like a video monitor onto your rig. (Fig. 8)

Fig. 5

Fig. 6

Fig. 7

Fig.8

USING THE GIMBAL SUPPORT

Grip + Body Brace

+ Shoulder Harness

Grip + Shoulder

Harness

The Universal Gimbal Support offers a variety of

conﬁgurations to support the weight of your rig and

help you capture the best image. With the shoulder

harness, body brace, and adjustable handles, you can

distribute the weight across your body and use the

support to shoot action or static shots at any angle.

Inverted Gimbal

Position w/o Harness

Vertical Follow Action

Reversed Handle

Horizontal Grip

www.AxlerSupports.com

GG1

AXLER

A Gradus Group Brand

ONE-YEAR LIMITED WARRANTY

This Axler product is warranted to the original purchaser to

be free from defects in materials and workmanship under

normal consumer use for a period of one (1) year from the

original purchase date or thirty (30) days after replacement,

whichever occurs later. The warranty provider’s

responsibility with respect to this limited warranty shall

be limited solely to repair or replacement, at the provider’s

discretion, of any product that fails during normal use of

this product in its intended manner and in its intended

environment. Inoperability of the product or part(s) shall be

determined by the warranty provider. If the product has been

discontinued, the warranty provider reserves the right to

replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused

by misuse, neglect, accident, alteration, abuse, improper

installation or maintenance. EXCEPT AS PROVIDED

HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY

EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES,

INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. This warranty provides you with speciﬁc legal

rights, and you may also have additional rights that vary from

state to state.

To obtain warranty coverage, contact the Axler Customer

Service Department to obtain a return merchandise

authorization (“RMA”) number, and return the defective

product to Axler along with the RMA number and proof

of purchase. Shipment of the defective product is at the

purchaser’s own risk and expense.

For more information or to arrange service, visit

www.axlersupports.com or call Customer Service at

212-594-2353.

Product warranty provided by the Gradus Group.

www.gradusgroup.com

Axler is a registered trademark of the GradusGroup.

Axler GSU-1 Quick start guide

Brand: Axler

Model: GSU-1

Type: Quick start guide

Download PDF

report

Axler GSU-1 Quick start guide

Axler GSU-1 Quick start guide

Related papers

Other documents