Midmark Synthesis® Cabinetry - Treatment Station User guide

Brand: Midmark

Model: Synthesis® Cabinetry - Treatment Station

Type: User guide

This manual is also suitable for

Synthesis® Cabinetry - Central Station

Midmark Synthesis® Cabinetry - Treatment Station offers flexible storage and support at your Twelve O’clock position. It's ideal for use as the primary Operatory workstation, providing essential storage and support. It features electrical ratings of 120 VAC, 50/60 HZ, 20 amp, and comes with various powered options like Task Light, USB Hub (4-port) Power Adapter, CPU Fan (USB powered), Power Supply (Heat Syringe) (Scaler), (Curing Light), Electric handpiece Hand Piece Illumination Power Adapter, Clock Timer Power Adapter, and Midmark Supplied Power Supply.

Style P

Synthesis

Casework

User’s Information

For Models:

Dental TS Casework

Dental CS Casework

User Guide

TP202 20-42-FO-00014 Rev A1 C2169

003-10110-00 Rev. AA4 (1/3/2020)

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Model Number:

Owner’s Product Information

(The information below is required when calling for service)

Model, Serial, or Sales Order Number Location.

In most cases, the Model, Serial, or Sales Order

Number(s) can be located by opening the door(s)

of the Base Cabinet and checking on the inside

walls of the cabinet.

Midmark Authorized Service Company:

DA2214i

Midmark Supplied Monitor

Model / Serial Number Location

Calling for Service

If service is required, contact your Midmark dealer.

To contact Midmark directly:

1-800-Midmark (1-800-643-6275)

8:00 am until 5:00 pm, Monday - Friday (EST)

www.midmark.com

Note

Model / Serial number information is required when calling for service.

Serial Number:

Date of Purchase:

Name of Owner / Facility:

Name of Dealer:

Dealer Phone Number:

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Table of Contents

Important Information

Owner’s Product Information ....................................................................................................2

Safety Symbols ........................................................................................................................4

Transportation / Storage Conditions ......................................................................................... 5

Safety Instructions .................................................................................................................... 5

Electrical Interference ..............................................................................................................5

Operating Enviroment ..............................................................................................................5

Disposal of Equipment .............................................................................................................5

Intendinded Use

Intended Use, Central Station (CS) .......................................................................................... 7

Intended Use, Treatment Station (TS) ......................................................................................9

Operation

Removal / Installation of 2” Drawer ........................................................................................10

Removal / Installation of Drawers ..........................................................................................11

Installing Doors, Handles and Shelves ..................................................................................12

Door Adjustments ...................................................................................................................13

Door Adjustments continued ..................................................................................................14

Glove, Cup, and Towel Install ................................................................................................. 15

Controls ..................................................................................................................................16

Intended Use, Task Light with Clock / Timer ..........................................................................16

Backup Power Mode ..............................................................................................................16

Setting Time of Day ................................................................................................................17

Timer Count-Down Operation ................................................................................................18

Timer Count-Up Operation .....................................................................................................19

Programming Preset Timer(s) for Time Setting ......................................................................19

Preset Timer(s) Count-Down Operation .................................................................................20

Track Monitor Arm

Intended Use ..........................................................................................................................21

Monitor Arm Adjustment ...................................................................................................22, 23

Cleaning & Maintenance ..................................................................................................24, 25

Warranty Information

Limited Warranty ....................................................................................................................26

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Important Information

Safety Symbols

WARNING

Indicates a potentially hazardous situation which could result in serious injury.

Equipment Alert

Indicates a potentially hazardous situation which could result in equipment damage.

Caution

Indicates a potentially hazardous situation which may result in minor or moderate injury.

It may also be used to alert against unsafe practices

Note

Amplifies a procedure, practice, or condition.

PREFABRICATED MEDICAL HEADWALLS AND MEDICAL SUPPLY UNITS

CS series, TS series

Have been investigated by UL in accordance with the Standard(s) indicated on this Certicate.

UL60601-1 and CAN/CSA C22.2, No. 601.1-M90, Medical Electrical Equipment, Part 1: General Requirements Safety

NFPA 70, National Electrical Code (NEC) C22.2 No. 0-M90, General Requirements - Canadian Electrical Code, Part II

UL 732, Test for Surface Burning Characteristics of Building Materials.

DANGER

Indicates an imminently hazardous situation which will result in serious or fatal injury.

This symbol is used only in the most extreme conditions.

Product Registration

To register your product, go to www.midmark.com

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Transportation / Storage Conditions

Ambient Temperature Range: .................................................................-22°F to +140°F (-30°C to +60°C)

Relative Humidity.........................................................................................10% to 90% (non-condensing)

Atmospheric Pressure ........................................................................ 7.2Psi to15.3Psi (50kPa to 106kPa)

Safety Instructions

The primary concern of Midmark is that this equipment is operated and maintained with the safety of the

patient and sta in mind. To assure safer and more reliable operation

• Read and understand this manual before attempting to operate the unit.

• Assure that appropriate personnel are informed on the contents of this manual; this is the responsibility

of the purchaser.

• Assure that this manual is located near the unit.

Electromagnetic Interference

The Midmark Casework is designed and built to minimize electromagnetic interference with other devices

However, if interference is noticed between another device and this product:

• Remove interfering device from room

• Plug Casework into a dedicated circuit

• Increase separation between Casework and interfering device

• Contact Midmark if interference persists

Operating Environment

Ambient Temperature Range; .... +68°F to 104°F (+20°C to 40°C)

Relative Humidity: ................ less than 80%(non-condensing)

• Approved for indoor use only.

Disposal of Equipment

At the end of product life, the casework, accessories, and other consumable goods may become

contaminated from normal use. Consult local codes and ordinances for proper disposal of equipment,

and other consumable goods.

WARNING

Equipment is not suitable for use in the presence

of a flammable anesthetic mixture with oxygen, air,

or nitrous oxide.

Clarification: Equipment is suitable for use in the presence

of oxygen, air, or nitrous oxide.

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Central Station

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Intended Use - CS

The Central Station (CS) provides exible storage congurations to be used in Dental Oces.

Electrical Rating / Requirements

CS 120V 120 VAC, 50/60 HZ, 20 amp.

Facility Branch Circuit Ratings Dedicated branch circuit rated at 120 VAC, 50/60 Hz, 25 amp.

CS Dental Casework Powered Options

Options:

Task Light

Cabinet

Mounted Light

Electrical

Rating

120VAC,

60 HZ

0.63 AMP

115VAC, 50/60 HZ

1.2 AMP

*Total connected load not to exceed CS electrical ratings.

Note

To ensure unit is properly grounded, it must be connected to a

matching grounded, dedicated, correctly polarized receptacle.

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Treatment Station

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Intended Use - TS

The Treatment Station (TS) can be used as the primary Operatory workstation, providing the needed stor-

age and support at the essential Twelve O’clock position.

Electrical Rating / Requirements

TS 120V 120 VAC, 50/60 HZ, 20 amp.

Facility Branch Circuit Ratings Dedicated branch circuit rated at 120 VAC, 50/60 Hz, 20 amp.

TS Dental Casework Powered Options

Options:

Task Light

USB Hub

(4port) Power

Adapter

CPU Fan

(USB powered)

Power Supply

(Heat Syringe)

(Scaler),

(Curing Light),

Electric handpiece

Hand Piece

Illumination

Power Adapter

Electrical

Rating

120VAC,

60 HZ

0.63 AMP

100-240VAC,

50/60HZ,

0.45 AMP

5V DC,

0.35-

0.40 A

115VAC, 50/60 HZ,

3 Amp

120V, 60HZ,

0.125 Amp

*Total connected load not to exceed TS electrical ratings.

Accessories: Clock Timer and

Monitor Mount Arm

Options:

Clock Timer

Power

Adapter

Midmark Supplied

Power Supply

Ratings

Electrical

Rating

100-240V

50/60 HZ

0.4 AMP

100-240V

50/60 HZ

2 AMP

Note

To ensure unit is properly grounded, it must be connected to a

matching grounded, dedicated, correctly polarized receptacle.

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Removal / Installation of 2” Drawers

To easily clean or remove liquids from drawer simply remove drawers by pulling or pushing side levers down

or up on sides of slides to release drawer.

Side

Lever

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Removal / Installation of Drawers

To easily clean or remove liquids from drawer simply remove drawers by pulling on sides of drawer to

release tabs.

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Installing Handles (If applicable)

Install door handle using hardware supplied.

Installing Handles (If applicable)

Install drawer handle using hardware supplied. Place

adhesive covers over screw heads.

Adhesive

Covers

Installing Shelf Clips & Shelf

Tilt shelf to fit into cabinet as shown. Install

shelf clips and place shelf on top of clips.

Shelf

Clip

Installing Doors

Install doors as shown.

Installing Door, Handles and Shelves

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Door Adjustment Side to Side

Turn screw located closest to door to increase or

decrease the door overlay side to side (+ or - 2 mm).

Left

Right

Door Adjustment Up and Down

Turn cam screw located in center of mounting plate

to adjust door position up or down (+ or - 2 mm).

Down

Door Adjustment

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Door Adjustment continued...

Door Adjustment Away or Closer

Turn Spiral Tech cam screw located furthest from

door to position the door farther from or closer to

cabinet (+3 mm or -2 mm).

Out

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Install Cups and Glove Boxes.

Place standard 5 oz. cups into dispenser hole.

Remove lid from box and slide box into slot secure

with bungee strap, may need to twist for thin boxes.

Thin

Box

Thick

Box

Strap

Tab

Glove, Cup and Towel Install

Install “C” Style Towels.

Place towel guide in outside slots and place

“C” style towels face down.

Install “Z” Style Towels.

Place towel guide in inside slots and place

“Z” style towels face down.

Install Cups and Glove Boxes.

Place standard 5 oz. cups into dispenser hole.

Remove lid from glove box and slide box into slot.

003-10110-00 © Midmark Corporation 2017 TP202 20-42-FO-00014 Rev A1 C2169

Controls

Operation

Backup Power Mode

If power is out for less than 30 seconds:

• Clock automatically restores correct time of day.

• Timer and display operation restored as if no power loss occurred.

• No alarm if timer counts down to zero during power loss.

If power is out for more than 30 seconds:

• Timer memory loses preprogrammed times.

• Preset times return to factory setting:

(Timer 1 = 40 secs. Timer 2 = 3:00 minutes).

• If necessary, Preset times must be reset.

Intended Use - Clock / Timer

This product is intended to be used as a timing device to indicate the time of day, and provide a means of

timing various processes used in the medical or dental procedures.

Clock/Timer Operation

Setting Time of Day

Press and Hold (Two Beeps) for three seconds.

Clock

Press

to increment Hour digit to desired time.

Hour/Min

Press

to decrement Hour digit to desired time.

Hour/Min

Press

to increment Minutes digit to desired time.

Min/Sec

Press

to decrement Minutes digit to desired time.

Min/Sec

Press

(One Beep) to Save the new time of day setting.

Clock

Current Setting

New Time of Day

Note

If the button is not depressed when the timer ends, the Clock / Timer will

begin to count-up. The time that has passed since the end of the

Clock alarm will be displayed.

Timer Count-Down

Press (One Beep)

Start

Press

to increment Minutes digit to desired setting.

Hour/Min

Press

to decrement Minutes digit to desired setting.

Hour/Min

Press

to increment Seconds digit to desired setting.

Min/Sec

Press

to decrement Seconds digit to desired setting.

Min/Sec

Press (One Beep) to begin timer count-down.

Start

At the end of the count-down the display

shows and the alarm sounds 5 times:

Press

(One Beep) to stop the alarm.

Clock

Note

Pressing (One Beep) cancels the count-down program and Time of Day is displayed.

Clock

00:00

Current Time of Day

00:00

Clock/Timer Operation

Timer Count-Up

Press (One Beep)

Start

Press

(One Beep) to begin timer count-up.

Start

Note

Pressing (One Beep) cancels the count-up program and Time of Day

is displayed.

Clock

00:00

Current Time of Day

00:01

Programming Preset Timer(s) for Time Setting

Press until desired preset to change is reached.

Preset

Press

or to increase desired time.

Hour/Min Min/ Sec

Press

or to decrease desired time.

Hour/Min Min/ Sec

Press and Hold

for three seconds to save new programmed time.

Preset

Current Programmed Preset Time

New Programmed Preset Time

Preset Timer(s) Count-Down

Press until desired preset to change is reached.

Preset

Press

(One Beep) to begin timer count-down.

Start

At the end of count-down the display shows

and the alarm sounds 5 times.

Press

(One Beep) to stop the alarm.

Clock

00:00

Note

Pressing (One Beep) cancels the count-down program and Time of Day

is displayed.

Clock

Current Time of Day

Note

If the button is not depressed when the timer ends, the Clock / Timer will

begin to count-up. The time that has passed since the end of the

Clock alarm will be displayed.

Current Programmed Preset Time

Clock/Timer Operation

Page is loading ...

Midmark Synthesis® Cabinetry - Treatment Station User guide

Brand: Midmark

Model: Synthesis® Cabinetry - Treatment Station

Type: User guide

This manual is also suitable for

Synthesis® Cabinetry - Central Station

Download PDF

report

Midmark Synthesis® Cabinetry - Treatment Station User guide

This manual is also suitable for

Midmark Synthesis® Cabinetry - Treatment Station User guide

Related papers

Other documents