Danfoss EVR 2 - 22, Normally Closed/ Normally Open (NC/NO) Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss EVR 2 - 22, Normally Closed/ Normally Open (NC/NO) Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
032R9545
EVR (NC flare)
DKRCC.PI.BB0.A7.02-520H4350
032R9545
© Danfoss A/S (AC-SMC / MWA) 12-2010
EVR (NC flange)EVR (NC solder)
Note: Tube
construction
Instruction
EVR 2 - 22, Normally Closed/Normally Open (NC/NO)
Refrigerants CFC, HCFC, HFC
Be sure that the O-ring is
in place
Warning
Never switch on power to
the coil when the coil is
dismounted from the valve.
Otherwise the coil may be
damaged and there is risk
of injuries and burns.
!
Warning
Never switch on power
to the coil when the coil
is dismounted from the
valve. Otherwise the coil
may be damaged and
there is risk of injuries and
burns
EVR (NO solder)
EVR Nm kpm ft-lbs Torx size
2, 3, 4, 6, 8 1.4 0.15 1 T 15
EVR Nm kpm ft-lbs Torx size
10, 15, 18 2.8 0.3 2 T 25
20, 22 12 1.2 9 T 40
Søren
Christian
Steensen
Digitally signed by
Søren Christian
Steensen
DN: cn=Søren Christian
Steensen, o=Danfoss A/
S, ou=AC,
email=scs@danfoss.
com, c=US
Date: 2010.12.27
14:06:09 +01'00'
EVR 2, 3 (NC)
EVR 4 - 8 (NC)
EVR 10 - 22 (NC) EVR 10 - 20 (NO)
EVR 4 - 8 (NO)
Sticker applies
only to UL products
© Danfoss A/S (AC-SMC / MWA) 12-2010
DKRCC.PI.BB0.A7.02-520H4350
EVR 4 - 22 (NC)
EVR 2- 3 (NC)
EVR 15 - 22 (NC)
EVR 4 - 10 (NC)
EVR 4 - 8
Sticker applies
only to UL products
Sticker applies
only to UL products
EVR 4 - 8 Dismounting gasket :
Pres and twist
/