Loading a CD
1
2
3
MW loop antenna
Speaker
(right)
Speaker
(left)
FM wire antenna
AC power cord
VOLTAGE
NOT FOR ALL
VERSIONS
SELECTOR
110V-
127V
220V-
240V
1
2
3
For radio reception, connect the supplied MW loop antenna and FM antenna to the respective terminals.
Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left speaker to "LEFT",
colored (marked) wire to "+" and black (unmarked) wire to "–".
After ensuring all the above connections have been made, connect the AC power cord to the wall outlet.
1
2
3
Press SOURCE on the front panel of the system to select CD or press
CD on the remote.
Press OPEN•CLOSE 0 to open the CD compartment.
Insert a CD with the printed side facing up. Press OPEN•CLOSE 0 again to
close the compartment.
Playback
1
2
3
After the system successfully reads the inserted CD, press PRESET ¡ / ™ once
or repeatedly until the desired track number appears in the display.
Press ÉÅ to start playback.
Press 9 to stop playback.
Tip
See the User Manual for playback of MP3-CDs.
1
MCM240 QUG_Eng 2005.6.9, 18:072