Philips MCM108D/79 Quick start guide

Philips
Brand
Philips
Model
MCM108D/79
Category
Home audio sets
Type
Quick start guide
Quick Start Guide
Step B
Step A
Enjoy
Setup
1
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
MW Antenna
Quick Start Guide
Pull out the insulation
plastic sheet.
2
User Manual
User Manual
VOLUME
ALBUM
DBB DSC
MUTE
SLEEP TIMER
REPEAT
SHUFF
AUX PROG
CD
TUNER
VOLUME
DBB DSC
Remote Control
MCM108D
2 Docks &
12 Dock Adapters
MCM108D_98 QUG_Eng 8/9/06, 13:181
Step A
Setup
1
2
3
Tip
It is unnecessary to
connect the FM pigtail
antenna since it is
fixed to the main unit.
Connection
5
1
2
3
4
Setting the clock
iR
PROG/CLOCK
MICRO SYSTEM MCM108D
For radio reception, connect the supplied MW antenna to the
MW aerial terminal.
Connect the speaker wires to the
SPEAKERS terminals.
Connect the power cord of the system to the
AC power outlet.
In standby mode, press
PROG/CLOCK button.
The clock digits for the hours flash.
Press ¡1 / 2™ to set the hours.
Press PROG/CLOCK again. The clock digits for the minutes flash.
Press ¡1 / 2™ to set the minutes.
Press PROG/CLOCK to confirm the time.
AC power cord
FM wire antenna
Speaker
(right)
Speaker
(left)
MW loop antenna
1
2
2
3
MCM108D_98 QUG_Eng 8/9/06, 13:182
1
2
3
4
5
Tip
Detailed playback features and
additional functions are described in
the accompanied owner's manual.
Step B
Enjoy
Playing a disc
1
2
Select TUNER source.
Press BAND (TUNER on the remote control) once or more to select your waveband.
Tu r n TUNING 0 to tune to a station.
Listening to radio
3
SLEEP TIMER
REPEAT
AUX
SHUFF
PROG
CD
TUNER
MUTE
CD
ALBUM
STANDBY-ON
SOURCE VOLUME
-
+
BAND
O
P
E
N
/
C
L
O
S
E
PROG/CLOCK
TUNING
SOURCE
BAND
TUNING
Select CD source.
Press OPEN•CLOSE on the top of the system to open the CD door.
Insert a disc with the printed side facing up and press down
on OPEN•CLOSE to close the CD door.
PressÉÅto start playback.
Press 9 to stop playback.
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD or TUNER,
for example).
– Then select the desired function (
2;
,
í
,
ë
for example).
MCM108D_98 QUG_Eng 8/9/06, 13:183
Step B
Enjoy
Playing iPod / Philips GoGear using the dock
1
Select the correct dock supplied, as indicated on the bottom panel of the dock,
to work with either your Apple iPod or Philips GoGear.
2
Select the correct dock adaptor supplied, then snap the adaptor into the dock
to provide a snug fit for the player.
● For the iPod adaptors, the indication on the adaptor’s back fits specific iPod player.
● For the Philips adaptors, a number marked on the adaptor’s back fits specific Philips GoGear player.
3
Correctly place your iPod or Philips GoGear in the dock.
4
Using the docking cable supplied, connect the DOCKING OUT jack and Mini-USB port
on the dock to DOCKING IN jacks (L and R) and Mini-USB port on the main set,
marked-red to R jack, and marked-white to L jack.
5
Press SOURCE repeatedly or on the set (or DOCK on the remote) to select DOCK source.
● For Philips GoGear player, make sure that you have powered it on before selecting DOCK source.
● The connected player will play automatically.
● The iPod/Philips GoGear battery will be charged in either standby mode or power-on mode.
Speaker
(right)
Speaker
(left)
Portable player
Dock
sd
Tip
Refer to the user manual supplied for
detailed descriptions of “Compatible
portable player”, “Selecting the correct dock
adaptor”, “Installing the dock adaptor”, and
the important notes for dock operation.
MCM108D_98 QUG_Eng 8/9/06, 13:184
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Philips MCM108D/79 Quick start guide

Philips
Brand
Philips
Model
MCM108D/79
Category
Home audio sets
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents