Philips MCD190/79 User manual

Type
User manual

This manual is also suitable for

MCD 190
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
2
User Manual
1
Quick Start Guide
Composite Video Cable MW antenna Remote Control
Quick Start Guide
User Manual
MCD190 QUG_Eng-21 2005.7.27, 10:481
4
speaker
(right)
speaker
(left)
AC power cord
FM wire
antenna
MW loop
antenna
1
2
3
Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left speaker to
"LEFT", coloured (marked) wire to "+" and black (unmarked) wire to "".
For radio reception, connect the supplied MW antenna to the "MW AERIAL" terminal.
Use the composite video cable (yellow) to connect the system's VIDEO jack to the video input jack (or labeled
as A/V In, Video In, Composite or Baseband) on the TV set.
Connect the power cord of the DVD system to the AC power outlet.
1
2
3
Tip
See the User Manual for other TV connection options.
4
Tip
It is unnecessary to connect the FM pigtail antenna since it
is fixed to the main unit.
MCD190 QUG_Eng-21 2005.7.27, 10:482
Setting up the TV
Press STANDBY ONB on the front panel of the DVD player or B on the remote to switch the DVD system
on and then select the disc source.
Switch on the TV set and set to the correct video-in channel until the blue Philips DVD background screen
appears on the TV.
2
1
Tip
See your TV manual for more details.
1
2
1
3
Setting up the TV Type and Language Preferences
In the stop mode or during playback, press SYSTEM MENU on the remote to
enter the system menu.
Press 22/33 on the remote to enter 'SYSTEM SETUP'. Then, select the color
system matching your TV and the TV type using 22/33/3/4 on the remote.
Press 22/33 on the remote to enter 'LANGUAGE SETUP' and select the
preferred OSD language, audio language, subtitle language and menu language using
22/33/3/4 on the remote.
MCD190 QUG_Eng-21 2005.7.27, 10:483
Loading a disc
Select the disc source, then press OPEN•CLOSE3 at the top of the DVD player.
Load in a DVD disc with the label side facing up.
A disc menu pops up.
Playback
Use 22/33/3/4 and OK or Numeric Keypad (0-9) on the remote to select a playback feature or item.
Playback will start automatically.
Press STOP9 to stop playback.
Types of Discs used on this DVD System
2
1
3
Tip
Refer to the user manual for playback of other types of discs.
2
1
Type
DVD VIDEO
AUDIO CD
VIDEO CD
MP3-CD
Record Playback Edit
DVD+RW
Super VCD
VIDEO CD
2005 © Koninklijie Philips Electronics N.V.
All rights reserved.
www.philips.com
MCD190 QUG_Eng-21 2005.7.27, 10:484
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Philips MCD190/79 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI