Philips MCM240B/98 Quick start guide
- Category
- CD radios
- Type
- Quick start guide
1
Quick Start Guide
3
Wall Mounting
MCM240B
What’s in the Box?
You should find these items upon opening the box.
2
User Manual
Stand FM and MW antennas Remote Control
Quick Start Guide
Wall Mounting Instructions
Quick start guide
Pull out the plastic
protective sheet.
2 x screws and 2 dowels
for wall mounting
User manual
MCM240B_98_QSG_Eng 1/18/08, 14:391
Loading a CD
1
2
3
MW loop antenna
Speaker
(right)
Speaker
(left)
FM wire antenna
AC power cord
VOLTAGE
NOT FOR ALL
VERSIONS
SELECTOR
110V-
127V
220V-
240V
1
2
3
For radio reception, connect the supplied MW loop antenna and FM antenna to the respective terminals.
Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left speaker to "LEFT",
colored (marked) wire to "+" and black (unmarked) wire to "–".
After ensuring all the above connections have been made, connect the AC power cord to the wall outlet.
1
2
3
Press SOURCE on the front panel of the system to select CD or press
CD on the remote.
Press OPEN•CLOSE 0 to open the CD compartment.
Insert a CD with the printed side facing up. Press OPEN•CLOSE 0 again to
close the compartment.
Playback
1
2
3
After the system successfully reads the inserted CD, press PRESET ¡ / ™ once
or repeatedly until the desired track number appears in the display.
Press ÉÅ to start playback.
Press 9 to stop playback.
Tip
See the User Manual for playback of MP3-CDs.
1
MCM240B_98_QSG_Eng 1/18/08, 14:392
-
1
-
2
Philips MCM240B/98 Quick start guide
- Category
- CD radios
- Type
- Quick start guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI